Siaretron 4000; Equipment Needed - Siare Siaretron 4000 Service Manual

4.1

Siaretron 4000

4.1.1 Equipment needed

To program the boards mounted on Siaretron 4000 (in addition to a personal computer and
the dedicated programming software), the following equipment is required:
•
Programmer: E8a RENESAS
•
USB cable to connect the PC
and the programmer
•
Flat cable for connection to the
connector on the lower side of
ventilator display for
programming the CPU board
•
Flat cable for direct connection
on the PROG connector on the
board.