Programming The Boards - Siare Siaretron 4000 Service Manual

4

PROGRAMMING THE BOARDS

This chapter describes the following operation.
4.1 Siaretron 4000
4.1.1 Equipment needed
4.1.2 Programming the CPU board (cod. G3020204x)
4.2 How to change the MICRO - RENESAS device
4.3 Programming summary
This Service Manual is specifically intended for specialist SIARE personnel
or qualified technical personnel, formally authorised by SIARE to work on
Siaretron 4000.
The specialist SIARE personnel or qualified technical personnel, formally
authorised by SIARE, must be aware of the full contents of this manual
before carrying out the operations described below.
Authorised SIARE technicians have the appropriate tools and spare parts
and are trained to operate while ensuring product and patient safety.
SIARE disclaims all liability with regard to technical interventions carried out
on equipment without formal authorisation from SIARE.
The User Manual is an integral part of this manual. The technician must
have a copy and know its contents before performing the operations
described in the Service Manual.