9.
Drive Mode
9.1 Setting Possibilities
9.2 Condition
9.3
Display and Keyboard
9.4 Setpoint Display /
Setpoint Presetting
The Drive Mode is a special operating mode of the KEB COMBIVERT. It allows
an easy manual startup. To activate the Drive Mode enter the corresponding
password in CP.0.
The passwords are listed on page E 48!
– Stop / Start / Run
– Setpoint value
– Direction of rotation
The control release must be activated (terminal stip X2).
Control release (terminal X2.3 / X2.4) and analog torque limitation
(terminal X2.16 / X2.17) are without function in the Drive Mode.
Indication of direction of rotation
Interface control
Transmit "LED flickers"
START
ENTER
F/R
STOP
Hold the SPEED-key pressed
down and decrease the indicated
value with the STOP-key.
9. Drive Mode
START
ENTER
FUNC.
F/R
SPEED
STOP
START
ENTER
FUNC.
F/R
SPEED
STOP
The preset setpoint value is
displayed for as long as the
SPEED-key is pressed down.
Setpoint value preset :
0 – max.16000 U/min
FUNC.
SPEED
ANTRIEBSTECHNIK
Indication of operating status /
actual speed / setpoint speed.
Operating-/ Error display
Normal "LED on"
Error "LED blinks"
Operator panel
START
ENTER
FUNC.
F/R
SPEED
STOP
Hold the SPEED-key pressed
down and increase the indicated
value with the START-key.
E 37