Introduction; Keb Combidyn S4; Part Code; Application - KEB COMBIVERT S4 Instruction Manual

1. Introduction

1.1 KEB COMBIVERT S4

1.2 Part Code

1.3 Application

E 4
The servo system KEB COMBIVERT S4 consists of the components:
– digital servo controller KEB COMBIVERT S4 (230V- or 400V class)
– synchronous servo motor KEB COMBIVERT SM
Servo System
03.S4.D20–3001
Sub-assembly
Rated speed
Mechanic construc- 0 = without brake / with featherkey to DIN
tion of the motor
Supply voltage
Housing design
Unit designation
Unit size
Regarding prefabricated motor, resolver and encoder
cables refer to "Accessories Cable " (page E 23).
The digital servo controller KEB COMBIVERT S4 serves exclusively for the control
and regulation of the supplied synchronous servo motor KEB COMBIVERT SM.
The servo system KEB COMBIVERT S4 is a highly dynamic control drive it is
connected and ready for operation within a short time.
The synchronous servo motor is also available with
brake.
Refer to "Accessories Braking Motor " (page E 41)
001 = Resolver / Incremental encoder simulation
002 = Resolver / Inc. enc. sim. / Interference suppression
003 = ERN 1387 / Incremental encoder simulation
004 = ERN 1387 / Inc. enc. sim. / Interf. suppr.
005 = Resolver / Incremental encoder input
006 = Resolver / Inc. enc. inp. / Interf. suppr.
007 = ERN 1387 / Inc. enc. inp.
008 = ERN 1387 / Inc. enc. inp. / Interf. suppr.
1 = 1500 U/min
2 = 2000 U/min
3 = 3000 U/min
4 = 4000 U/min
6 = 6000 U/min
1 = with brake / with featherkey to DIN
2 = without brake / without featherkey
3 = with brake / without featherkey
E = replacement part
2 = 200 V class
4 = 400 V class
D or E
S4
M1...M4, 01...04, 11...14, 21...24