Parameter Description - KEB COMBIVERT S4 Instruction Manual

8. Parameter Description

Password Input
Locking of CP Parameters:
Enabling of CP Parameters:
Actual Speed Display
E 28
The servo controller is supplied ex factory without password protection, i.e. all
programmable parameters can be changed. After the parameterizing the unit can
be locked against unauthorized access. The adjusted mode is stored.
The passwords are listed in page E 48!
FUNC.
SPEED
1) Wrong password;
repeat entry!
FUNC.
SPEED
1) Wrong password;
repeat entry!
Display of current motor speed.
Rotation "forward":
Rotation "reverse":
Example:
Parameter
enabled
START
1)
ENTER
F/R
Parameter
locked
Parameter
locked
START
1)
ENTER
F/R
Parameter
enabled
Resolution 0,5 U/min.
Represented by negative speed with a resolution of1
U/min .
Rotation "forward"
Rotation "reverse"
Speed1837 U/min or 1837,5 U/min
START
Password
STOP
START
Password
STOP