Table of Contents
Advertisement
4.
Proceed to "3.5 Connect Cable".
3.4
Install on Wall
Ensure that the wall can bear at least 4 times the weight of the eNB. Follow the steps
below to install the eNB on the wall.
1.
Against the wall mounting bracket on the wall, with the arrow pointing up. Mark the
drilling locations with a pencil or marker.
2.
Drill two .4in/10mm diameter by 2.8in/70mm deep holes in the wall at the marked
locations.
3.
Insert expansion bolts into the two drilled holes.
12
Advertisement
Table of Contents
