Table of Contents
Advertisement
About This Document
This document is a guidance of Nova230i hardware installation for installation personnel,
including the preparation of installation tools and supporting materials, the demands for
installation environment, installation procedure, cable connection and power on.
Accomplish the installation of the device according to this guide, the installation personnel
can avoid potential damage to the device during the installation procedure, which makes
sure the subsequent good running of the device.
This document suits for the models of pBS41010 eNodeB (eNB).
Copyright Notice
Baicells Technologies, Inc., copyrights the information in this document. No part of this
document may be reproduced in any form or means without the prior written consent of
Baicells Technologies, Inc. Refer to the "Contact Us" section below.
Disclaimer
The information in this document is subject to change at any time without notice. For more
information, please consult with a Baicells technical engineer or the support team.
Revision Record
Date
20 Sep., 2022
Contact Us
Baicells Technologies Co., Ltd.
Address
10-11F, Bldg. A1, No.1 Zhongguancun,
Yongfeng Industrial Base, Haidian
Dist., Beijing, China
Phone
400-108-0167
Email
contact@Baicells.com
support@Baicells.com
Website
www.Baicells.com
Version
Description
01
Initial Released.
China
or
Baicells Technologies North America, Inc.
North America
555 Republic Dr., #200, Plano, TX 75074,
USA
+1-888-502-5585
sales_na@Baicells.com
support_na@Baicells.com
https://na.Baicells.com
or
Advertisement
Table of Contents
