Percussion drill and
some drill heads
5mm L-shape allen
wrench
multimeter
2.3
Location & Environment
In addition to network planning, when determining where to place the eNB you need to
consider factors such as climate, hydrology, geology, the possibility of earthquakes,
reliable electric power, and transportation access. Avoid locating the eNB in areas where
there may be extreme temperatures, harmful gases, unstable voltages, volatile
vibrations, loud noises, flames, explosives, or electromagnetic interference (e.g., large
radar stations, transformer substations). Avoid areas prone to impounded water, soaking,
leakage, or condensation.
Table 2-2 provides typical environmental specifications for this eNB.
Item
Temperature
Relative humidity
(no condensation)
Safety voltage
2.4
Personnel Requirements
The installation personnel must master the basic safe operation knowledge, through the
hammer
T7 screwdriver
head
Table 2-2 Environmental Requirements
Range
-40°C to 55°C
5% to 95%
42V to 58V
Cross screw
Cable vice
driver
Ladder
compass
8
Tape measure
fixed pulley
Typical value
25°C
5% to 95%
48V