BNA6 Advance & BNR Advance Note Validator and Note Recycler
4.4.2.1
Quality requirements for banknotes
Banknotes filled in the loading module must meet the following requirements:
No holes, tear, folds
Banknote ends may not be folded or torn by more than a quarter of its length!
No larger writing, stains, spots or stamps
No tape, staples, pins, other foreign matter attached to the banknote
Banknotes must not be machine washed, excessively worn, limp or wrinkled
Banknotes must not be wet or damp
No two or more banknotes stuck together
4.5
Controlling BNA6 Advance & BNR Advance note validator and note
recycler
The note validator/recycler is controlled by the host machine. This chapter just lists the main functions to be controlled externally. All
information on how to control the note validator/recycler is provided in the separate Integration Manual.
4.5.1
Enabling/disabling banknote denominations
The host machine may customize the acceptance of banknotes according to the respective requirements by sending appropriate enabling or
disabling commands (see separate Integration Manual).
4.5.2
Returning new banknote denomination as change (note recycler only)
Please refer to the separate Integration Manual to align change capacity and banknote denomination(s) provided by the recycling and loading
modules with the requirements of your host machine. The following section describes how to readjust the loading module to a new banknote
size.
01_CPI_BNA6 Advance Note Validator-BNR Advance Note Recycler_User Guide_V2.0_EN
Published by CPI
Operate
35