Opening And Closing Top (Acceptance Module) Flaps - CPI BNA6 ADVANCE User Manual

BNA6 Advance & BNR Advance Note Validator and Note Recycler
4.3.2.1

Opening and closing top (acceptance module) flaps

The acceptance module is equipped with two flaps, a top and a rear flap. The rear flap can only be opened when the top flap is closed. To
open the rear flap:
1
From the rear side of the note validator/recycler, push both yellow latch buttons [1] on the top of the validator/recycler [A] and
2
simultaneously unfold the upper rear flap [2] [A].
Now you are able to access the validation area of the acceptance module and unfold the flap on the top.
To open the flap on the top of the note validator/recycler:
3
Still from the rear side of the validator/recycler pull the yellow
latch [3] on the top [B] and
4
simultaneously unfold the top flap [4] [B].
You gained access to the banknote feeder and positioner.
To close both flaps:
5
Close the top flap [C] and push both yellow latch buttons to
close the upper rear flap [D].
01_CPI_BNA6 Advance Note Validator-BNR Advance Note Recycler_User Guide_V2.0_EN
Fig. 34:Unfolding upper rear flap
Published by CPI
Fig. 35: Unfolding top flap
Fig. 36: Closing top and upper rear flap
Operate
21