Table of Contents
Advertisement
7
System Menu
1
To open the System menu:
SETTING key to enter the Setting interface, then select the System menu.
Press the
2
Menu introduction:
Time Settings: Set the local time.
·
Time Zone Selection: Set the time zone. The default state is Poland UTC+1.
·
Language: The default language is English. The menu display language can be
·
switched between Chinese and English.
Multi Screen Display: Set the Startup Delay. The range is 0 to 255, 0 indicates no
·
startup delay, and a range of 1 to 255 indicates the delay in seconds. The function of
multi screen display can be realized by setting the matching values of splicing rows and
columns with the horizontal proportion and vertical proportion. The position are set from
left to right and from top to bottom. Set the Edge Masking , and default is off.
ID Set: Set the machine ID between 1~255.
·
Net Start System: The default state is OFF. When it is OFF, the machine cannot be
·
woken up; when it is ON, the machine can be woken up via network.
New Signal Input: Set the on/off of the new signal input of the machine. When it is On,
·
the machine will automatically switch to the corresponding channel when it detects new
signal input.
[Notes]
This function is not applicable for some signal sources.
Signal Backup: Main/standby signals can be set. When the main signal does not work,
·
can automatically switch to the standby signal.
11
Advertisement
Table of Contents
