Advanced User Menu - Menu Location - Hisense HMD2C21A User Manual

Operational Instructions and Function Adjustment

The options include Auto, DVI, and DP, each of which corresponds to a signal input channel. The
default value is Auto. Select DVI or DP to switch to the corresponding signal input channel.

After you select Auto, the system automatically identifies the signal input channel.
Note

The LCD monitor automatically enters sleep mode when it detects no output signals for several
seconds, and the power indicator lights on in orange.

While the LCD monitor is in sleep mode, the system automatically wakes up display when
detecting an input signal.

After you select Auto, if the LCD monitor is connected to both DVI and DP channels, DVI input is
used by default. To switch to the DP channel, select the DP option.
Monitor Info

Tap Monitor Info to view the basic LCD monitor information, such as its model, resolution, serial
number, and firmware version.
All Reset

Tap All Reset to set all menu parameters to the default settings.
Note

After you press OK, all menu parameters are restored to the default settings.
Advanced User Menu – Menu Location
Set Menu Location to position menus. The options include Upper Left, Bottom Left, Upper Right,
Bottom Right, and Center. The default value is Bottom Right.
Procedure:
1) Press and hold the OK button on the LCD
monitor for 3 seconds to go to the Advanced
User menu.
2) Press or
OK to go to the Menu Location menu on the
right.
3) Press or
adjusted, and press OK to confirm the selection
and go to the next menu.
4) Press or
5) Press BACK to return to the previous menu.
to select the icon. Press
to select the item to be
to select an option.
19 | Operational Instructions and Function Adjustment | Hisense Product User Guide |
Advanced User menu
Upper Left
Bottom Left
Upper Right
Bottom Right
Center
Menu Location