Table of Contents
Advertisement
Battery replacement method
1.
Disconnect the battery cover from the remote control at the battery cover
buckle and open the battery cover.
2.
Insert two AAA 1.5V alkaline batteries. Note that the positive (+) and negative
(-) terminals of the batteries must match the positive (+) and negative (-)
terminals in the battery case.
3. Close the battery cover from top to bottom until it is fully aligned with the
remote control.
Precautions
1. If the remote control is not working properly, is unstable, or can't control the
device, please replace the batteries.
2. If you do not use the remote control for a long time or the battery is
exhausted, remove the battery. (Waste battery pollute the environment and
must be handled properly.)
3. In order to achieve the best remote control effect, please point the black
launch window on the back of the remote control at the indicator light of the
device.
Effective range
1. Remote control distance: The distance from the front of the remote control is
valid within 8m.
2. Remote control angle: With the remote control receiving window of the
device as the apex, the angle in horizontal direction at the distance of 6m is
at least ±30°, and the angle in vertical direction is at least ±15°.
6
Advertisement
Table of Contents
