Hisense 55GM60AE User Manual page 11

5. This product can be both used in horizontal mode and vertical mode. The
horizontal installation is shown in Figure 1, and the vertical installation state is
shown in Figure 2.
[Note]
· Only the installation specification of the wall mount is described here; the
appearance of rear shell is for schematic purpose only.
· The screw installation depth in the wall-mount holes of the rear shell is 6-10mm;
overlong screws will cause irreparable damage to the equipment.
· If the intactness of the machine cannot be guaranteed during wall mounting, please
contact professional installation personnel or technical support personnel.
· This wall mount is suitable for concrete and brick walls. For plank and plasterboard
walls, special reinforcement is required instead of directly using the wall mount.
Ensure that a single expansion bolt fixed in the wall can bear over 1/3 of the overall
weight of the machine.
Figure 1: Horizontal instllation
Figure 2: Vertical instllation
4