Table of Contents
Advertisement
Operational Instructions and Function Adjustment
result.
5) Press
to return to the User menu.
Note:
1) This function is available only in Single mode.
2) This function is available 30 minutes after the system is powered
on.
User Menu-System Settings
In the power-on state, you can set other functions for the monitor.
Procedure:
1) In the User menu, press ▲ or ▼ to select System Settings and then
press
to enter the System Settings menu.
2) Press ▲ or ▼ to select the target item and then press
the corresponding sub-menu.
3) In the Menu Settings menu, you can set Language, Menu
Location, and Menu Transparency.
4) In the Power menu, you can set the power indicator brightness to
High, Low, or Off.
5) In the Human Sensor menu, you can set the human sensor to On or
Off.
6) In the Ambient Light Sensor menu, you can set the sensor to On or
Off.
7) In the Auto Awake menu, you can set whether to awake the
monitor when a DP1 communication signal is coming in the
standby state.
8) In the Monitor Info menu, you can view Version, SN, Product
Usage Time, and Backlight Usage Time of the monitor.
9) In the Multi-Window Settings menu, you can set the mode to
Three, Four, or Back to original mode.
10) In the Logo Set menu, you can set whether to display the logo upon
power-on.
11) In the Factory Reset menu, you can restore the monitor parameters
to factory defaults.
12) Press
to return to the User menu.
to enter
14
System Settings
Menu Settings
Power
Low
Human Sensor
Off
Ambient Light Sensor
Off
Auto Awake
Off
Monitor Info
Multi-Window
Settings
Back
Logo Set
On
Factory Reset
Upward
Downward
Select
Back
Advertisement
Table of Contents
