Remote Reception (G3 Fax); Giving The Reception Command From An External Telephone; Night Reception (G3 Fax/Internet Fax) - Muratec MFX-C3035 User Manual

For details on the settings, refer to "[Forward TX Settings]" on
page 2-16.
This function cannot be used together with PC fax reception, memory
reception or night reception.

Remote reception (G3 fax)

Remote reception is the function for giving this machine the command to
receive a fax by entering a remote reception number from an external tele-
phone.
In order to use remote reception, the following settings in the [Fax Settings]
screen ([Admin Settings]) must be specified.
Set [Comm. Settings] - [RX Mode] to [Manual RX].
Set [Remote RX Settings] - [Remote RX Enabled] to [Yes].
With [Remote RX Settings] - [Remote RX No.], specify the remote recep-
tion number for giving the command to receive a fax.
For details on the parameters in the [Comm. Settings] screen, refer to
"[Comm. Settings]" on page 2-10.
For details on the parameters in the [Remote RX Settings] screen,
refer to "[Remote RX Settings]" on page 2-16.

Giving the reception command from an external telephone

The procedure for using remote reception is described below.
1
When the external telephone rings, pick up the receiver, and then check
that a fax is being sent.
2
With the external telephone, type in the remote reception number (2 dig-
its).
The machine starts receiving the fax.
3
Replace the telephone receiver.
When using remote reception with pulse dialing, the telephone must
be switched to pulse dialing. For details on switching to pulse dialing,
refer to the instruction manual for the telephone.

Night reception (G3 fax/Internet fax)

Night reception is the function for prohibiting printing of received documents
during the specified night times. Documents received during the time that
printing is prohibited are all printed when the machine is finally able to print.
Useful reception functions 4-9