Broadcasting; Making Changes To Broadcasts - Muratec MFX-1200 Operating Instructions Manual

Advanced features

Broadcasting

The fastest way to fax one document to many recipients is to broadcast it.
In an ordinary broadcast, you send the fax as you normally would, except you just
add more fax numbers. You can enter up to 230 numbers:
30 manually-dialed numbers AND
200 autodialer numbers OR 1 call group with all 200 autodialer numbers
You can broadcast using any function that requires a fax number to be
entered. That means you can send a delayed broadcast, program a polling broad-
cast and even broadcast to hub units for F-Code relay broadcast initiation. All of
these are explained in this chapter.
To send a broadcast fax:
1
Insert the document and make any necessary adjustments as you would for a
regular fax transmission.
2
Press .
BROADCAST
3
Enter the first fax number, as usual. Use either a one-touch number, a speed-
dial number, a call group or a regular number dialed from the numeric keypad.
4
To add more fax numbers, press
comma. Then enter the number as described in step 3 (pressing
own comma). You can send to up to 230 numbers for a broadcast.
Press Start
[03],S098,G12,9-555_
Important: Do not insert a comma after the last fax number.
Note: If you enter characters by mistake, press
5
Press . Your fax machine scans the document into memory and then
START
sends it to each number or call group you ve entered.
3.10
between each one to insert a
BROADCAST
GROUP
to erase them.
CANCEL
Delayed broadcasting
What if you want the broadcast to take place later? That s the purpose of setting up
a delayed broadcast.
Note: Delayed commands are discussed on pages 2.8 and 2.9. And you may want
to read Delayed transmission on page 3.11 before proceeding.
1
Follow steps 1 4 of Broadcasting basics (left column).
2
Press
ADVANCED FUNCTIONS
3
Use the numeric keypad to enter the day of the month and time (in 24-hour
format) when you want the broadcast to occur.
Here, we ve scheduled it for 10:15
Delayed
Enter Time: 30/22:15
4
Press
ENTER
5
Press
START
return to standby mode, while showing this on the
inserts its
** Reserved **
Jun 01 2000
This means your fax machine is reserved for the delayed broadcast you
just programmed, but it can still be used to send and receive faxes if your
broadcast document is stored in memory.

Making changes to broadcasts

If you need to make changes in a broadcast after setting it up, use the
REVIEW COMMANDS
2.8.
, .
ENTER
on the 30th.
PM
to save the setting.
. Your machine will scan your document into the memory and
17:17
function. See Reviewing or canceling parts of a broadcast, page
:
LCD