Programming A Batch Transmission - Muratec MFX-1200 Operating Instructions Manual

Programming a batch transmission

For this operation to work, two things must be true:
The batch box you re using must exist on your fax machine.
You must know the batch box s identifier number (1 5).
To program a batch transmission into a programmable one-touch key:
1
Press Program key, , 3, 0, 1,
A
grammable one-touch number available:
Select Program No.
P2:No Number Stored
Note: If P2 appears on the
LCD
number for P1. You can see what you programmed into P1 by press-
ing , if you want. For example, if you set P1 for storing of the polling
document, you will see:
Select Program No.
P1:Polling Document
Press to go back to the programmable one-touch key you want to
enter.
Note: To erase a programmable one-touch key, see page 3.49.
2
Press the key that you want to program or change. Here, we ve selected P2.
Select Program No.
P2:No Number Stored
Note: If your previous command for this key was for a batch transmission
and you want to keep this key programmed for a batch transmission,
use these instructions to make changes. But if you want to assign this
key to a completely different operation (for a delayed transmission, for
example), then you first must erase the stored command before pro-
gramming the new one.
3
If you want to select a different programmable one-touch key than the one
that appears on the , press that key now.
LCD
4
Press . The asks which operation you want to program into the pro-
ENTER LCD
grammable one-touch:
Type :Communication
← ← / → → /Enter
Note: If changing a previously stored command, skip to step 7.
. The shows the first empty pro-
ENTER LCD
, it means that you have already entered a
5
Press until Communication appears.
Type :Communication
← ← / → → /Enter
6
Press ,
ENTER ADVANCED FUNCTIONS
shows:
Batch Tx
Enter Box No. :_
7
Use the numeric keypad to enter the one-digit identifier for the batch box you
want to assign to this one-touch key. Here, we ve entered 5:
Batch Tx
Enter Box No. :5
Note: To change an identifier already entered, press
Then re-enter the correct identifier.
8
Press . The asks if you want to make additional settings for this
ENTER LCD
programmable one-touch number.
O p t i o n : O f f
← ← / → → /Enter
If you do not want to make additional settings, press
If you do want to make additional settings, press
9
The asks which resolution you want to use for this programmable one-
LCD
touch number.
Resolution :-----
← ← / → → /Enter
10
Press until the mode you want appears.
Note: For any of the following settings, choose ----- if you do not want to
specify the displayed setting for this programmable one-touch key.
11
Press . The asks you to select a contrast mode for each programma-
ENTER LCD
ble one-touch number.
C o n t r a s t : - - - - - - -
← ← / → → /Enter
12
Press until the mode you want appears.
Advanced features
five times and then press . The
ENTER
to erase it.
CANCEL
. Skip to step 16.
ENTER
and .
ENTER
LCD
3.45