Fax Dialing Via Speed-Dial; Phoning Via Speed-Dial - Muratec MFX-1200 Operating Instructions Manual

Fax dialing via speed-dial

To dial a fax call using a speed-dial number:
1
Place the document in the
ADF
2
If you are using the glass, enter the document size by pressing the
FBS
.
DOCUMENT SIZE
3
Adjust resolution and contrast if necessary.
4
Press / . The
SPEED DIAL TEL INDEX
Enter Speed-Dial No.
S_
5
Use the numeric keypad to enter the three-digit identifier (such as 018, in this
example) for the speed-dial number you want to dial. The
Location (or fax number) you stored:
ID
Plano Office
S018_
6
Press .
START
What happens next depends on whether you specified memory transmission or real
time transmission:
If you specified quick memory transmission:
Your fax machine scans the first page of your document into memory, then dials
the other fax machine.
While dialing, your machine scans the other documents into memory.
The shows the Location and the document s width and resolution settings:
LCD ID
Plano Office
A4 Normal
Note: If the entry doesn t have a Location
When the other machine answers, your fax transmits the scanned document
directly from memory. (To review Quick memory transmission, see page 2.3.)
If you specified normal memory transmission:
Your fax machine scans your entire document into memory, then dials the other
fax machine.
, or on the glass.
FBS
shows:
LCD
shows the
LCD
, the number appears.
ID
The shows the Location and the document s width and resolution settings:
LCD ID
Plano Office
A4 Normal
Note: If the speed-dial entry doesn t have a Location
When the other machine answers, your fax will transmit the document directly
from memory. (To review Memory transmission, see page 2.3.)
If you specified real time transmission:
Your fax machine dials the other fax machine.
The shows the Location and the document s width and resolution settings:
LCD ID
Plano Office
A4 Normal
Note: If the speed-dial number doesn t have a Location
When the other machine answers, your fax feeds the document through its scan-
ner, transmitting as it goes. (To review the Real time transmission, see page 2.3)

Phoning via speed-dial

To dial a phone call using a speed-dial number, you must have an optional handset
attached to your machine. To make the call:
1
Obtain a dial tone by doing one of the following:
Lift the handset
Press / to use the monitor speaker
MONITOR CALL
2
Press / . The
SPEED DIAL TEL INDEX
* * Tel Mode **
S_
3
Use the numeric keypad to enter the three-digit identifier for the speed-dial
number you want to dial. As the machine dials, it shows the number on the
:
LCD
* * Tel Mode **
9-555-5783_
Note: Remember that your fax machine s monitor speaker is not a speakerphone.
If you dialed using the monitor speaker, pick up the handset to speak to the
person that answers!
Note: If the call fails, and you used
hang up.
Advanced features
, the number appears.
ID
, the number appears.
ID
shows:
LCD
/ to dial, press
MONITOR CALL MONITOR
/ to
CALL
3.7