Muratec MFX-1200 Operating Instructions Manual page 48

Combine
Note: This feature is available only for MFX-1600 model.
This feature allows you to copying from four one-sided originals to one sheet of
paper.
1
Make sure the machine is in the Copy mode.
2
Place your original document in ADF face up, or on the FBS glass face down.
3
Enter the document size by pressing the
4
Press twice,
ADVANCED FUNCTIONS
Combine : O f f
/ /Enter
Note: This feature is Off for default setting. However, you can turn on it for
the default. (See page 4.7.)
5
Press or until the setting you want appears.
In this example, we ve chosen On.
Combine :On
/ /Enter
6
Press to save the setting. The machine return to the standby mode
ENTER
with following display:
Copy <Combine> 1
Ltr [ Ltr ] 100%
7
As needed, set the following:
Select document type and adjust image contrast
Enter the number of copies
Set copy reduction or enlargement ratio
8
Press .
START
Note: To reset the copy parameter to default setting, press
Note: To stop the copying, press
STOP
.
DOCUMENT SIZE
. The shows the current setting:
ENTER LCD
.
COPY RESET
.
Ultra copy mode
Note: This feature is available only for MFX-1600 model.
Note: The enlargement/Reduction copy is not available with this mode.
Note: This mode needs more memory than normal mode. So when you try to make
many copies at a time, the memory overflow may occur.
This feature allows you to copying with more high quality resolution.
1
Make sure the machine is in the Copy mode.
2
Place your original document in ADF face up, or on the FBS glass face down.
3
Enter the document size by pressing
4
Press three times,
ADVANCED FUNCTIONS
setting:
Ultra Copy :Off
/ /Enter
5
Press or until the setting you want appears.
In this example, we ve chosen On.
Ultra Copy :On
/ /Enter
6
Press to save the setting. The machine return to the standby mode
ENTER
with following display:
Copy <Ultra Copy> 1
Ltr [ Ltr ] 100%
7
As needed, set the following:
Select document type and adjust image contrast
Enter the number of copies
8
Press .
START
Note: To reset the copy parameter to default setting, press
Note: To stop the copying, press
STOP
Basic operation
.
DOCUMENT SIZE
. The shows the current
ENTER LCD
.
COPY RESET
.
2.17