Muratec MFX-1200 Operating Instructions Manual page 94

Plain-paper digital fax/copier/printer
Hide thumbs Also See for MFX-1200:
Table of Contents

Advertisement

6
Press
. The
now shows either:
ENTER
LCD
P2:Fax#/Advan.Func.
_
7
Use the numeric keypad to enter the number exactly as your machine should
dial it, including whatever codes your phone system requires. The number can
be up to 40 characters in length:
P2:Fax#/Advan.Func.
9-5550696_
Your display shows only 20 characters at a time. To view characters beyond
those 20, press
to scroll to the left or
Important: Do not press
ENTER
8
Next, while you can still see the fax number on the
twice and then press
TIONS
ENTER
9
If you want the polling to begin immediately every time you press the key,
press
and skip to step 12.
ENTER
If you want to delay the polling, press
10
Next, tell your fax to carry out this delayed command one of these ways:
Option 1:
Perform the command once at a certain time on a certain day of
the month. (For example, Do this at 5:05
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Delayed
Enter Time: 30/17:05
Option 2:
Perform the command at a certain time each day you press the
key. (For example, Do this at 5:05
To select this option, use the numeric keypad to enter 0, 0 and
then the time the fax should perform the command:
Delayed
Enter Time: 00/17:05
11
Press
,
.
ENTER
ENTER
12
Press
to return your machine to standby mode.
STOP
P2:Fax#/Advan.Func.
or
9-5558743_
to scroll to the right.
.
, press
LCD
ADVANCED FUNC
.
,
.
ADVANCED FUNCTIONS
ENTER
on the 30th. )
PM
today. )
PM
Programming an F-Code transmission
For this operation to work, two things must be true:
You must know how the remote fax is using each F-Code box to which you re
transmitting for example, as a security box or a relay box. Different fax manu-
facturers may use slightly different terms, but the concepts are the same.
You must know the remote fax s
which you want to transmit.
To program an F-Code transmission into a programmable one-touch key:
1
Press Program key,
grammable one-touch number available:
Select Program No.
P2:No Number Stored
Note: If P2 appears on the
-
number for P1. You can see what you programmed into P1 by press-
ing , if you want. For example, if you set P1 for storing of the polling
document, you will see:
Select Program No.
P1:Polling Document
Press
to go back to the programmable one-touch key you want to
enter.
Note: To erase a programmable one-touch key, see page 3.49.
2
Press the key that you want to program or change. Here, we ve selected P2.
Select Program No.
P2:No Number Stored
Note: If your previous command for this key was for an F-Code transmis-
sion and you want to keep this key programmed for an F-Code
transmission, use these instructions to make changes. But if you want
to assign this key to a completely different operation (for a delayed
transmission, for example), then you first must erase the stored com-
mand before programming the new one.
3
If you want to select a different programmable one-touch key than the one
that appears on the
LCD
4
Press
. The
ENTER
LCD
grammable one-touch:
Type :Communication
← ← / → → /Enter
-
sub-address and password for each box to
ITU
T
, 3, 0, 1,
. The
shows the first empty pro-
A
ENTER
LCD
, it means that you have already entered a
LCD
, press that key now.
asks which operation you want to program into the pro-
Advanced features
3.41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfx-1600

Table of Contents