Primary Mode - Muratec MFX-1200 Operating Instructions Manual

Alarm&Key Volume:Min
/ /Enter
12
Press to save the setting.
ENTER
Setting Sleep mode (Energy saving mode)
Default setting: 30 minutes.
Your machine is initially set to be in the Sleep mode automatically when 30 minutes
has passed after you pressed any key last.
Note: All lamps on the control panel will not be off, even when the machine is
LED
in the Printer sleep mode.
If you want to change the time or to set the Sleep mode to OFF, you can set it here.
1
Press Program key, , 1, 0, 5,
B
Sleep Mode :On
/ /Enter
2
Press or until the mode you want appears.
In this example, we ve chosen On.
Sleep Mode :On
/ /Enter
If you chose On, proceed to step 3.
If you chose Off, skip to step 4
3
Press to save the setting. The
ENTER
Sleep mode using numeric keypad (1 - 120 min.).
Sleep Mode Timing
(001-120):030
Note: Your machine will be in the Sleep mode when the time you set has
passed after you pressed any key last.
4
Press to save the setting.
ENTER
= Low setting.
.
ENTER
now asks you to enter the time for the
LCD

Primary mode

Default setting: None.
You can set the primary standby mode in this operation. After finishing any jobs,
your machine will return to the mode you set here immediately.
1
Press Program key, , 1, 0, 7,
B
Primary Mode :None
/ /Enter
2
Press or until the mode you want appears.
In this example, we ve chosen Copy.
Primary Mode :Copy
/ /Enter
3
Press to save the setting.
ENTER
Setting 2-bin tray (Option)
Default setting: Copy exit: Lower tray, Fax exit: Upper tray, List exit: Upper tray,
PC-Fax exit: Upper tray
You will set where to exit the printed paper in this operation.
Note: This operation will appear only when your machine has the optional 2-bin
tray unit.
1
Press Program key, , 1, 0, 9,
B
2-Bin Tray :Off
/ /Enter
2
Press or until the mode you want appears.
In this example, we ve chosen On.
2-Bin Tray :On
/ /Enter
If you chose On, proceed to step 3.
If you chose Off, skip to step 7.
Changing the default settings
.
ENTER
.
ENTER
4.9