5.14 Error Correction Result Codes - Multitech MT2834MR Owner's Manual

PN 88300150
&E11 = Normal Mode Modem Flow Control (Xon/Xoff) on
Computer (or Terminal)-Initiated Flow Control(Pacing) Commands:
&E12 = Pacing off
&E13 = Pacing on (either RTS on/off or Xon/Xoff depending on the setting of &E4 or &E5).*
*Factory default setting
**The factory default setting for data compression is enabled, but the modem will not compress data
(&E15) unless &E1 (auto-reliable mode) or &E2 (reliable mode) is also selected.
Data Compression Commands:
&E14 = Data Compression disabled
&E15 = Data Compression enabled**
*Factory default setting
**The factory default setting for data compression is enabled, but the modem will not compress data
(&E15) unless &E1 (auto-reliable mode) or &E2 (reliable mode) is also selected.

5.14 Error Correction Result Codes

When the MT2834MR is operating with error-correction enabled, five of its responses are altered, to let
you know that you have made a connection in Reliable mode. These Result Codes for a V.42 MNP
connection are listed below:
Verbose
CONNECT RELIABLE
CONNECT 1200 RELIABLE
CONNECT 2400 RELIABLE
CONNECT 4800 RELIABLE
CONNECT 9600 RELIABLE
CONNECT 14400 RELIABLE
CONNECT 19200 RELIABLE
CONNECT 21600 RELIABLE
CONNECT 24000 RELIABLE
CONNECT 26400 RELIABLE
CONNECT 28800 RELIABLE
CONNECT 31200 RELIABLE
CONNECT 33600 RELIABLE
The result codes for a V.42 LAP-M connection are listed below:
Verbose
CONNECT LAPM
CONNECT 1200 LAPM
CONNECT 2400 LAPM
CONNECT 4800 LAPM
CONNECT 9600 LAPM
CONNECT 14400 LAPM
CONNECT 19200 LAPM
CONNECT 21600 LAPM
CONNECT 24000 LAPM
4/3/01
Terse
1R
5R
9R
11R
12R
13R
19R
21R
24R
26R
28R
31R
33R
Terse
1L
5L
9L
11L
12L
13L
19L
21L
24L
52