Table of Contents
Advertisement
PN 88300150
Aborting an Escape Sequence
The +++AT<CR> escape will abort if you do not issue a <CR> before the Wait for <CR> Time interval
expires.
The <BREAK>AT<CR> method will also abort if you do not issue a <CR> before the Wait for <CR> Time
interval expires, and also if any of the following occurs:
1.
An illegal sequence is detected, including:
a) A character other than A follows the <BREAK>;
b) A character other than T follows <BREAK>A;
c) Two BREAKS are received in succession;
2.
The command buffer overflows before a <CR> occurs.
If you have any questions about the information contained in this document, please direct them to:
4/3/01
Technical Support
c/o Multi-Tech Systems, Inc.
2205 Woodale Drive
Mounds View, Minnesota 55112 USA
100
Advertisement
Table of Contents
