Table of Contents
Advertisement
PN 88300150
Remote Configuration Procedures
This section explains how to use the Remote Configuration feature; they are the same whether or not a
call originates from the remote modem.
Remote Configuration Operation
1. Enter a break signal, then type the S13 remote configuation escape character three times (the
default S13 value is the "%" sign).
The modem responds with:
1. - DATA Mode
2. - COMMAND Mode
2. Select 1 or 2. With option 1, the modem goes back into Data mode and with option 2, the modem
responds with Password>.
3. Type your SETUP password and, if the code is correct, the modem responds with OK.
You can now use any AT commands remotely as if they were entered locally. You cannot change
the LOGIN password until you enter the proper LOGIN password.
4. When you are done typing AT commands and you wish to exit, type AT0 and press ENTER. The
modem responds with:
1. DATA Mode
2. COMMAND Mode
5. Type 1 to go back on-line with your computer, or type 2 and the correct password to talk to your
modem.
4/3/01
103
Advertisement
Table of Contents
