Appendix D Result Code Summary - Multitech MT2834MR Owner's Manual

PN 88300150
DIGIT WORDS
"Multi-Tech" Result Codes*
0 OK
1 CONNECT
2 RING
3 NO CARRIER
4 ERROR
5 CONNECT 1200
6 NO DIAL TONE
7 BUSY
8 NO ANSWER
9 CONNECT 2400
11 CONNECT 4800
12 CONNECT 9600
13 CONNECT 14400
19 CONNECT 19200
21 CONNECT 21600
23 CONNECT 1275
24 CONNECT 24000
26 CONNECT 26400
28 CONNECT 28800
Note: If the MT2834MR is used in MNP Reliable mode, the following Result Codes
change:
1R CONNECT RELIABLE
5R CONNECT 1200 RELIABLE
9R CONNECT 2400 RELIABLE
11R CONNECT 4800 RELIABLE
12R CONNECT 9600 RELIABLE
13R CONNECT 14400 RELIABLE
19R CONNECT 19200 RELIABLE
21R CONNECT 21600 RELIABLE
24R CONNECT 24000 RELIABLE
26R CONNECT 26400 RELIABLE
28R CONNECT 28800 RELIABLE
*See Note 2 for "AT Command Set Result Codes".
4/3/01
Appendix D
Result Code Summary
EFFECT
Command was executed without error; ready for next command.
Modem has detected carrier and gone on-line.
Modem has detected ring caused by incoming call.
No carrier signal has been detected within allowed time.
Error in Command line (too many, or invalid characters).
Modem has detected carrier at 1200 bps and gone on-line.
No dial tone has been detected.
A busy signal has been detected.
Remote system did not answer.
Modem has detected carrier at 2400 bps and gone on-line.
Modem has detected carrier at 4800 bps and gone on-line.
Modem has detected carrier at 9600 bps and gone on-line.
Modem has detected carrier at 14400 bps and gone on-line.
Modem has detected carrier at 19200 bps and gone on-line.
Modem has detected carrier at 21600 bps and gone on-line.
Modem is connected in V.23 mode.
Modem has detected carrier at 24000 bps and gone on-line.
Modem has detected carrier at 26400 bps and gone on-line.
Modem has detected carrier at 28800 bps and gone on-line.
79