Table of Contents
Advertisement
PN 88300150
With the *R1 command, the modem will put out a ring message and raise pin 22 on the
RS232.
*R0
No ring message on outbound callback attempt.
*R1
Ring message and pin 22 enabled on outbound callback attempt.
The factory default setting is *R0.
#V
User Control of V.32terbo in Answer Mode
#V0
V.32terbo enabled.
#V1
V.32terbo disabled.
The factory default setting is #V1.
Note:
The bits that are used in the rate sequence words for V.32terbo can cause handshaking to fail
with some V.32bis modems.
4/3/01
38
Advertisement
Table of Contents
