Multitech MT2834MR Owner's Manual page 26

PN 88300150
For example to store the number 1-612-631-3550 as number N3, type ATDT16126313550N3
and hit ENTER. The number is not dialed with this store command.
After storing a phone number, check if it has been stored correctly by typing ATL and hitting
ENTER.
When phone numbers are stored, the entire command line is also stored so that you can
effectively create a macro for each number. For example, if you know a particular number
needs extended result codes, detect busy/dial tone, error correction, Xon/Xoff flow control,
pacing, and data compression, type: ATX4&E1&E5&E13&E15DT16126313550N3.
N Dialing a Stored Number
To automatically dial a telephone number that you a have stored in the MT2834MR number
memory, type ATNn (where n = 0 through 9). For example, to dial a number stored at N3,
type ATN3 and hit ENTER. Do not include the letter D in this command, or the stored
number is erased.
NN Number Linking
You may cause the MT2834MR to dial a second number automatically if the first number you
dialed is busy. This is useful in a situation where a computer can be accessed through more
than one phone number. This is called "linking".
To link the number at N1 to the number at N2, type ATN1N2 and hit ENTER. Several
numbers can be linked in the same command. For example, to link N1 to N2 to N3 to N4, or
link N1 to N2 and back to N1 and then back to N2, type ATN1N2N3N4 in the first example,
and ATN1N2N1N2 in the second example.
The only limit to the number of numbers that can be linked is the 60 characters allowed in a
command line. Number linking can not be used with blind dialing, since busy signals would
not be detected. You would have to select the Wait-for-Dial-Tone dialing method using the X
command to use the Number Linking feature.
Note: The NN command is not used in the MT2834MRK.
L Listing Numbers Stored in Memory
Telephone numbers stored in the MT2834MR's memory may be listed and displayed with the
L command. It displays all ten stored numbers in a format like that shown below. All digits
and command letters are shown. The number's "name" (0 thru 9) is shown first, followed by
the complete dialing command and telephone number as originally typed.
Type ATL and hit ENTER to display these numbers on your video screen or printout. An
example of an L command listing is shown below.
0 T14082345678
1 T16125551212;
2 P9, T14089876543
3 T3738315,12101,16126313550
4 T6313551R
5
6 P9,4258513
7
8 ATX4&E1E5&E13&E15DT16126313550N3
9 T12138880123
4/3/01 26