Moto Z (Droid) / Moto Z
Level 2 – Service and Repair Manual
Spine Flex Removal
NOTE
The Spine Flex can be recovered and
reused after removal.
1.
Place the PCB on a flat, steady surface, as
shown.
2.
Use the Thin Plastic Spudger to disconnect the
bottom Spine Flex BtB Connector.
3.
Use the Thin Plastic Spudger to disconnect the
top Spine Flex BtB Connector.
4.
Insert the Thin Plastic Spudger under one end of
the Spine Flex.
5.
Slide the Thin Plastic Spudger toward the other
end of the Spine Flex to separate the adhesive
from the PCB.
PAGE 49
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola