Rf Bracket Removal - Lenovo motorola Moto Z Droid Service And Repair Manual

Moto Z (Droid) / Moto Z
Level 2 – Service and Repair Manual

RF Bracket Removal

NOTE
The RF Bracket can be recovered and
reused after removal.
1. Place the PCB on a flat, steady surface, as
shown.
2. Insert the Thin Plastic Spudger under the middle
of the RF Bracket.
3. Slide the Thin Plastic Spudger toward the bottom
of the RF Bracket to separate the adhesive from
the PCB.
PAGE 48
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola