Related Manuals for Lenovo motorola DROID TURBO 2
Summary of Contents for Lenovo motorola DROID TURBO 2
- Page 1 DROID TURBO 2 / Moto X Force DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual...
-
Page 2: Revision History
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual EVISION ISTORY Revision Date Notes 10/30/2015 Initial release. Bounce Chassis Screw Guide (3-00-F6-10000) added to Tools Required for 12/04/2015 Assembly and Battery Assembly. • Figure 8 updated to include the DROID Logo. •... -
Page 3: Table Of Contents
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual ABLE OF ONTENTS Revision History ..............................2 _Toc441747693 List of Tables ................................. 6 Table of Figures ................................6 Safety Information ................................ 7 Cautions and Warnings ............................7 _Toc441747698 Battery Safety Guidelines .............................. - Page 4 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Rear-Facing Imager Removal ............................58 Proximity Grommet Removal ............................59 Microphone Grommet Removal ........................... 60 Loudspeaker Removal ..............................61 Vibrator Removal ................................. 62 Headset Jack Removal ..............................63 NFC Antenna Removal ..............................
- Page 5 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Rear Inlay Assembly ..............................125 Audio Deco Assembly ..............................132 SIM/SD Tray Assembly .............................. 135 Motorola Mobility Confidential Restricted: PAGE 5 Do not share without consent from Motorola...
-
Page 6: List Of Tables
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual IST OF ABLES Table 1. External Views Parts List ........................... 9 Table 2. PSCD Gap Measurements ..........................16 Table 3. Exploded View Parts List ..........................18 Table 4. -
Page 7: Safety Information
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual AFETY NFORMATION Cautions and Warnings Electrostatic Discharge The phone components may be damaged by electrostatic discharge (ESD). Always use an ESD mat and ground strap when working with internal components. Battery Safety Guidelines Handle Battery with care. -
Page 8: Introduction
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual NTRODUCTION External Views Figure 1. External Views Motorola Mobility Confidential Restricted: PAGE 8 Do not share without consent from Motorola... -
Page 9: Table 1. External Views Parts List
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Table 1. External Views Parts List Reference # Description Front-Facing LED Flash Earpiece Speaker Front-Facing Imager Display Lens Power Key Volume Key Rear-Facing Imager Bezel Rear-Facing Imager LED Flash Motorola Logo Rear Housing... -
Page 10: Pscd Gaps
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual PSCD Gaps All dimensions are in millimeters (mm). The following gaps are considered maximum allowable without further approval from a supervisor. Measure gaps at an angle perpendicular to the surface/area being measured. Feeler Gauges must not be used at an angle as they will give false-positive results. -
Page 11: Figure 3. Pscd Rear View
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Figure 3. PSCD Rear View Motorola Mobility Confidential Restricted: PAGE 11 Do not share without consent from Motorola... -
Page 12: Figure 4. Pscd Side View
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Figure 4. PSCD Side View Motorola Mobility Confidential Restricted: PAGE 12 Do not share without consent from Motorola... -
Page 13: Figure 5. Pscd Top View And Cross Section View
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Figure 5. PSCD Top View and Cross Section View Motorola Mobility Confidential Restricted: PAGE 13 Do not share without consent from Motorola... -
Page 14: Figure 6. Pscd Display Alignment
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Figure 6. PSCD Display Alignment Motorola Mobility Confidential Restricted: PAGE 14 Do not share without consent from Motorola... -
Page 15: Figure 7. Pscd Front-Facing Imager Alignment
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Figure 7. PSCD Front-Facing Imager Alignment Motorola Mobility Confidential Restricted: PAGE 15 Do not share without consent from Motorola... -
Page 16: Table 2. Pscd Gap Measurements
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Table 2. PSCD Gap Measurements Reference # Description Front Rim Housing to Lens Liner Perimeter Lens Liner to Audio Deco (Left Point) Step Lens Liner to Audio Deco (Right Point) Step Audio Deco Tilt (Left Point vs. - Page 17 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Reference # Description Front-Facing Imager Center to Main Lens Artwork Center Concentricity Motorola Mobility Confidential Restricted: PAGE 17 Do not share without consent from Motorola...
-
Page 18: Exploded Views
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Exploded Views Figure 8. Assembly Exploded View Table 3. Exploded View Parts List Reference # Description Recovery Part DIE CUT,LINER,LENS,NO BRANDING ASSY,HSG,AU DECO,T&R,METALLIC RED,KINZIE (REWORK) BZL,AU DECO,METALLIC BLK (REWORK) BZL,AU DECO,METALLIC SLVR (REWORK) BZL,AU DECO,METALLIC DK GRY (REWORK) ASSY,HSG,AU DECO,T&R,METALLIC RED,KINZIE (ORIGINAL) - Page 19 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Reference # Description Recovery Part ASSY,HSG,SIM DOOR, FULL FLOOR TRAY,DARK MTLC GRAY, KINZIE ASSY,HSG,SIM DOOR,FULL FLOOR TRAY,LIGHT ASSY,HSG,SIM DOOR, FULL FLOOR TRAY,SINGLE SIM,METALLIC DK GRAY ASSY,HSG,SIM DOOR, FULL FLOOR TRAY,SINGLE SIM,METALLIC SILVER,KI ASSY,HSG,SIM DOOR, FULL FLOOR TRAY,SINGLE SIM,METALLIC CHAMPAGNE...
- Page 20 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Reference # Description Recovery Part DIE CUT,ADHES,CAMERA,DECO ASSY,CAMR DECO,METALLIC SLVR ASSY,CAMR DECO,METALLIC DK GRY ASSY,CAMR DECO,METALLIC CHMPGN ASSY,CAMR DECO,BLACK ASSY,DROID LOGO,DARK MTLC GRAY,KINZIE ASSY,DROID LOGO,DARK MTLC SILVER,KINZIE ASSY,DROID LOGO,METALLIC CHAMPAGNE,TALL,KINZIE ASSY,DROID LOGO,DARK GRAY/BLACK,KINZIE Motorola Mobility Confidential Restricted:...
-
Page 21: Table 4. Subassembly Exploded View Parts List
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Figure 9. Subassembly Exploded View Table 4. Subassembly Exploded View Parts List Reference # Description Recovery Part SCRN,MESH,EARPIECE,TOP SCRN,MESH,MIC5 SCRN,MESH,METAL,BOTTOM,BLACK,KINZIE SCRN,MESH,METAL,BOTTOM,SILVER,KINZIE PAD,HT SPREADER,DISPLAY TO CHAS ASSY,HSG,FRNT FLSH LENS,KINZIE ASSY,HSG,FRNT FLSH LENS,WHITE,KINZIE GROM,SEAL,MIC 5 PAD,CONNECTOR,REAR IMGR... - Page 22 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Reference # Description Recovery Part ALERT DEVICE,VIBR,MOTOR, ROTARY, 11.75 MM X X 4.55 MM MOTOR BODY USB PAD 5.10 DIE CUT,ADHES,LOUD 5.11 PLT,METAL,ANTENNA,FEED,X+1 5.12 SCRN,MESH,MIC3 5.13 SCRN,MESH,MYLAR,MIC2,CAV 5.14 LENS,IMAGER,REAR...
-
Page 23: Dln Liner Replacement
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual DLN L INER EPLACEMENT Tools Required for DLN Liner Replacement The following tools are required to replace the DLN Liner on the DROID TURBO 2 / Moto X Force phone. Description Part # Picture / Drawing... -
Page 24: Masc Procedure
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual MASC Procedure Description Reference # ASSY,HSG,LENS W/ FRNT HOUSING,PSA,BLACK,KINZIE ASSY,HSG,LENS W/ FRNT HOUSING,PSA,WHITE,KINZIE DIE CUT,LINER,LENS,NO BRANDING Place the phone in the Bounce Lens Liner Alignment Fixture (3-00-E3-10000). Motorola Mobility Confidential Restricted: PAGE 24 Do not share without consent from Motorola... - Page 25 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Place the alignment lid on the fixture. Spray the Display and all 3 audio ports with compressed air to remove any dust or foreign material. Use the Lens Removal Pick Tool (3-00-E4- 10000) to lift the corner of the old DLN Liner, and then peel it off the Display.
- Page 26 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Wipe the Display with a Kimwipe in a clockwise motion and remove any lint or dust. Wipe the Display with an Alpha Dry Wipe in a counterclockwise motion.
- Page 27 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Remove the adhesive liner from the DLN Liner. 10. Place the DLN Liner into the fixture over the Display, using the pins in the fixture and the 3 audio ports and the 3 pins to align it.
- Page 28 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual 12. Remove the top liner from the DLN Liner. 13. Remove the phone from the fixture. 14. Use the roller or pick to press out any remaining air bubbles.
-
Page 29: Customer Procedure
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Customer Procedure Power off the phone. Use the Lens Removal Pick Tool to lift the corner. Then, peel off the lens. Use the wet cloth, then dry cloth. Make sure there’s no lint or dust left. - Page 30 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Press and drag down, then across the center. Wait 15 seconds, then press outward from the center. Pull tab 2 to remove the top cling. Wait 24 hours and press out any remaining air bubbles.
-
Page 31: Disassembly And Recovery
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual ISASSEMBLY AND ECOVERY Disassembly and Recovery Map Audio Bezel SIM/SD Tray Rear Inlay Rear-Facing Rear-Facing DROID Logo Imager Lens Imager Bezel Secondary- Earpiece Front-Facing Rear NFC Antenna Microphone Vibrator Loudspeaker... -
Page 32: Tools Required For Disassembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Tools Required for Disassembly The following tools are required to disassemble the DROID TURBO 2 / Moto X Force phone. Description Part # Picture / Drawing Bounce Inlay Heating Plate 3-00-F5-10000 4-00-Z2-10000... -
Page 33: Sim/Sd Tray Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual SIM/SD Tray Removal NOTE The SIM/SD Tray can be recovered and reused after removal. Insert the SIM Tray Removal Tool into the SIM/SD Tray hole. Push the SIM Tray Removal Tool into the SIM/SD Tray hole until the SIM/SD Tray ejects from the phone. -
Page 34: Water Detection Label Inspection
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Water Detection Label Inspection Inspect the Water Detection Label (WDL) visible through the SIM/SD Tray slot. Motorola Mobility Confidential Restricted: PAGE 34 Do not share without consent from Motorola... -
Page 35: Audio Deco Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Audio Deco Removal Use the Thin Plastic Spudger to pry the Audio Bezel from the Display. NOTE After you remove the Audio Bezel, you cannot reuse it. Motorola Mobility Confidential Restricted: PAGE 35 Do not share without consent from Motorola... -
Page 36: Rear Inlay Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Rear Inlay Removal NOTE The Rear Inlay can be recovered and reused after removal. Place the Bounce Inlay Heating Plate (3-00-F5-10000) on the Hot Plate. Set the Hot Plate to 80 °C (176 °F). // CAUTION // Do not set the Hot Plate temperature higher than 80 °C (176 °F). - Page 37 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Slide the Thin Plastic Spudger under the Rear Inlay at an angle towards the corner nearest the SIM/SD Tray slot. Slide the Spudger towards the corner until the corner of the Rear Inlay lifts from the Rear Housing.
- Page 38 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual 11. Lift the Rear Inlay from the Rear Housing. Motorola Mobility Confidential Restricted: PAGE 38 Do not share without consent from Motorola...
-
Page 39: Rear-Facing Imager Bezel Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Rear-Facing Imager Bezel Removal NOTE The Rear-Facing Imager Bezel can be recovered and reused after removal. Use the Blackstick to push the Rear-Facing Imager Bezel out of the Rear Inlay. Motorola Mobility Confidential Restricted: PAGE 39 Do not share without consent from Motorola... -
Page 40: Rear-Facing Imager Lens Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Rear-Facing Imager Lens Removal Use the Thin Plastic Spudger to pry the Rear-Facing Imager Lens from the Rear Housing. NOTE After you remove the Rear-Facing Imager Lens, you cannot reuse it. -
Page 41: Droid Logo Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual DROID Logo Removal NOTE After you remove the DROID Logo, you cannot reuse it. Bend the bottom left corner of the Rear Inlay until the left edge of the DROID Logo lifts from the Rear Inlay. -
Page 42: Rear Housing Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Rear Housing Removal NOTE The Rear Housing can be recovered and reused after removal. Use the flat end of the Blackstick to remove the NFC Flex Stopper. Use the flat end of the Blackstick to disconnect the NFC Flex BtB Connector from the PCB. - Page 43 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Remove the 17 3IP Screws from the Rear Housing. Press and hold the Power Key and Volume Key. NOTE The Side Keys will fall out when the Rear Housing is removed from the phone.
-
Page 44: Side Key Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Side Key Removal NOTE The Side Keys can be recovered and reused after removal. Use the flat end of the Blackstick to remove the Power Key and Volume Key from the Rear Housing. Motorola Mobility Confidential Restricted: PAGE 44 Do not share without consent from Motorola... -
Page 45: Battery Disconnection
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Battery Disconnection /// WARNING /// // CAUTION // Failure to adhere to Safety Critical Note(s) may increase Handle the Battery Pack with care. If dropped to the risk of rupture, burning, or failure to function safely when floor, it may be internally damaged and must be used by the customer. - Page 46 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Remove the 2 3IP Screws from the Chassis. Lift the Chassis from the phone. NOTE The Chassis can be recovered and reused after removal. Use the flat end of the Blackstick to disconnect the Battery Flex BtB Connector from the PCB.
-
Page 47: Front-Facing Imager Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Front-Facing Imager Removal NOTE The Front-Facing Imager can be recovered and reused after removal. Use the flat end of the Blackstick to disconnect the Front-Facing Imager BtB Connector. Lift the Front-Facing Imager out of the pocket of the Display. -
Page 48: Front-Facing Imager Gasket Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Front-Facing Imager Gasket Removal Use the Plastic Tweezers to remove the Front-Facing Imager Gasket from the pocket of the Display. NOTE After you remove the Front-Facing Imager Gasket, you cannot reuse it. -
Page 49: Earpiece Speaker Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Earpiece Speaker Removal Use the flat end of the Blackstick to pry the Earpiece Speaker out of the pocket of the Display. NOTE After you remove the Earpiece Speaker, you cannot reuse it. -
Page 50: Secondary-Microphone Grommet Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Secondary-Microphone Grommet Removal Use the Tweezers to remove the Secondary- Microphone Grommet from the Display. NOTE After you remove the Secondary- Microphone Grommet, you cannot reuse Motorola Mobility Confidential Restricted: PAGE 50 Do not share without consent from Motorola... -
Page 51: Battery Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Battery Removal /// WARNING /// // CAUTION // Failure to adhere to Safety Critical Note(s) may increase Handle the Battery Pack with care. If dropped to the risk of rupture, burning, or failure to function safely when floor, it may be internally damaged and must be used by the customer. -
Page 52: Pcb Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual PCB Removal NOTE The PCB can be recovered and reused after removal. Remove the Kapton Tape from the Touch Flex ZIF Connector. NOTE After you remove the Kapton Tape, you cannot reuse it. - Page 53 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Use the flat end of the Blackstick to lift the Coax Cable from the retaining clips. Use the flat end of the Blackstick to disconnect the Coax Cable from the PCB. Remove the Kapton Tape from the Display Flex ZIF Connector.
-
Page 54: Trim Ring Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Trim Ring Removal NOTE The Trim Ring can be recovered and reused after removal. Use the flat end of the Blackstick to pry the Trim Ring away from the recess on the bottom side of the Display. -
Page 55: Ir Led Flex Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual IR LED Flex Removal NOTE The IR LED Flex can be recovered and reused after removal. Use the Tweezers to remove the Kapton Tape from the IR LED Flex ZIF Connector. NOTE After you remove the Kapton Tape, you cannot reuse it. -
Page 56: Ir Led Grommet Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual IR LED Grommet Removal Use the Tweezers to remove the IR LED Grommet from the PCB. NOTE After you remove the IR LED Grommet, you cannot reuse it. Motorola Mobility Confidential Restricted: PAGE 56 Do not share without consent from Motorola... -
Page 57: Coax Cable Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Coax Cable Removal NOTE The Coax Cable can be recovered and reused after removal. Pull up on the Coax Cable to disconnect it from the PCB. Motorola Mobility Confidential Restricted: PAGE 57 Do not share without consent from Motorola... -
Page 58: Rear-Facing Imager Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Rear-Facing Imager Removal NOTE The Rear-Facing Imager can be recovered and reused after removal. Use the Tweezers to remove the Kapton Tape from the Rear-Facing Imager ZIF Connector. NOTE After you remove the Kapton Tape, you cannot reuse it. -
Page 59: Proximity Grommet Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Proximity Grommet Removal Use the Tweezers to remove the Proximity Grommet from the PCB. NOTE After you remove the Proximity Grommet, you cannot reuse it. Motorola Mobility Confidential Restricted: PAGE 59 Do not share without consent from Motorola... -
Page 60: Microphone Grommet Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Microphone Grommet Removal Use the Tweezers to remove the 4 Microphone Grommets from the PCB. NOTE After you remove the Microphone Grommets, you cannot reuse them. Motorola Mobility Confidential Restricted: PAGE 60 Do not share without consent from Motorola... -
Page 61: Loudspeaker Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Loudspeaker Removal Use the flat end of the Blackstick to pry the Loudspeaker from the Rear Housing. NOTE After you remove the Loudspeaker, you cannot reuse it. Motorola Mobility Confidential Restricted: PAGE 61 Do not share without consent from Motorola... -
Page 62: Vibrator Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Vibrator Removal NOTE The Vibrator can be recovered and reused after removal. Hold the Retaining Tab open. With the Retaining Tab open, push the Vibrator out of the pocket of the Rear Housing. Motorola Mobility Confidential Restricted: PAGE 62 Do not share without consent from Motorola... -
Page 63: Headset Jack Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Headset Jack Removal NOTE The Headset Jack and Headset Jack Gasket can be recovered and reused after removal. Use the flat end of the Blackstick to pry the Headset Jack from the pocket of the Rear Housing. -
Page 64: Nfc Antenna Removal
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual NFC Antenna Removal Using both hands, push the NFC Antenna out of the Rear Housing. NOTE After you remove the NFC Antenna, you cannot reuse it. Motorola Mobility Confidential Restricted: PAGE 64 Do not share without consent from Motorola... -
Page 65: Parts Refresh
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual ARTS EFRESH Tools Required for Parts Refresh The following tools are required for parts refresh of the DROID TURBO 2 / Moto X Force phone. Description Part # Image Blackstick... -
Page 66: Battery Cleaning
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Battery Cleaning /// WARNING /// // CAUTION // Failure to adhere to Safety Critical Note(s) may increase Handle the Battery Pack with care. If dropped to the risk of rupture, burning, or failure to function safely when floor, it may be internally damaged and must be used by the customer. - Page 67 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Use the Blackstick and ISP Alcohol to remove any remaining adhesive from the Battery. // CAUTION // To prevent damage, do not allow sharp tools or screws to come in contact with the Battery.
-
Page 68: Pcb Cleaning
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual PCB Cleaning Use the Blackstick and ISP Alcohol to remove any remaining adhesive from the PCB. Use the Blackstick and ISP Alcohol to remove the Display Flex ZIF Connector Pad. Use the Blackstick and ISP Alcohol to remove the Rear-Facing Imager ZIF Connector Pad. - Page 69 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Use the Blackstick and ISP Alcohol to remove the IC Copper Tape. Use the Blackstick and ISP Alcohol to remove the PCB Shield Copper Tape. Motorola Mobility Confidential Restricted: PAGE 69 Do not share without consent from Motorola...
-
Page 70: Rear Housing Cleaning
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Rear Housing Cleaning Use the Blackstick and ISP Alcohol to remove any remaining adhesive left by the NFC Antenna. NOTE This step is applicable only if the NFC Antenna was removed during disassembly. - Page 71 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Use the Blackstick and ISP Alcohol to remove the Loudspeaker Gasket. Motorola Mobility Confidential Restricted: PAGE 71 Do not share without consent from Motorola...
-
Page 72: Rear Inlay Cleaning
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Rear Inlay Cleaning Use the Blackstick and ISP Alcohol to remove any remaining adhesive from the Rear Inlay. Motorola Mobility Confidential Restricted: PAGE 72 Do not share without consent from Motorola... -
Page 73: Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual SSEMBLY Assembly Map Main- ZIF Connector Proximity Rear-Facing IR LED Microphone IR LED Flex Coax Cable Preparation Pads Grommet Imager Grommet Grommets Secondary- Front-Facing Earpiece Battery Side-Key Flex Microphone Battery... -
Page 74: Tools Required For Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Tools Required for Assembly The following tools are required to assemble the DROID TURBO 2 / Moto X Force phone. Description Part # Picture / Drawing Universal Press Fixture 3-00-A3-10000 Universal Press Weights... - Page 75 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Description Part # Picture / Drawing Bounce Audio Gasket Alignment Fixture 3-00-D9-10000 Bounce Inlay Adhesive Fixture 3-00-E8-10000 Bounce Chassis Screw Guide 3-00-F6-10000 Bounce Audio Bezel Press Tool 3-00-F7-10000 3IP Torx Bit Torque Driver (Adjustable)
- Page 76 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Description Part # Picture / Drawing 3M AP-111 Adhesion Promoter Motorola Mobility Confidential Restricted: PAGE 76 Do not share without consent from Motorola...
-
Page 77: Rear Housing Wdl Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Rear Housing WDL Assembly Description Reference # ASSY,HSG,REAR,METALLIC DK GRY ASSY,HSG,REAR,TIN SILVER,KINZIE ASSY,HSG,REAR,CHAMPAGNE,KINZIE ASSY,HSG,REAR,RED,KINZIE LBL,WATER, DETECT Place the Rear Housing WDL near the SIM/SD Card slot as shown. Motorola Mobility Confidential Restricted: PAGE 77 Do not share without consent from Motorola... -
Page 78: Pcb Preparation
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual PCB Preparation Description Reference # ASSY,PWA,MN,BOUNCE VZW ASSY,PWA,MN,BOUNCE,ROW ASSY,PWA,MN,64 GB,BOUNCE,VZW ASSY,PWA,MN,64 GB,BOUNCE,ROW ASSY,PWA,MN,32 GB,BOUNCE,CHINA,ROW DIE CUT,ADHESIVE,COPPER TAPE,MSM8994 DIE CUT,ADHES,COP TAPE,PM8994 DIE CUT,ADHESIVE,PCB-CHASSIS LBL,WATER, DETECT Motorola Mobility Confidential Restricted: PAGE 78 Do not share without consent from Motorola... - Page 79 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Place the PCB into the Bounce PCB Assembly Fixture (3-00-D7-10000). Remove the PCB Shield Copper Tape from the carrier. Place the PCB Shield Copper Tape into the fixture over the PCB, using the pins in the fixture to align it.
- Page 80 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Place the PCB into the fixture. Remove the PCB Adhesive from the carrier. 10. Place the PCB Adhesive into the fixture, using the pins in the fixture to align it. 11.
- Page 81 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual 14. Place the PCB into the fixture. 15. Remove the IC Copper Tape from the carrier. 16. Place the IC Copper Tape into the fixture, using the pins in the fixture to align it.
- Page 82 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual 21. Place the PCB WDL on the PCB in the location shown. 22. Press down on the PCB WDL for 5 seconds to secure it to the PCB. Motorola Mobility Confidential Restricted: PAGE 82 Do not share without consent from Motorola...
-
Page 83: Zif Connector Pad Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual ZIF Connector Pad Assembly Description Reference # ASSY,PWA,MN,BOUNCE VZW ASSY,PWA,MN,BOUNCE,ROW ASSY,PWA,MN,64 GB,BOUNCE,VZW ASSY,PWA,MN,64 GB,BOUNCE,ROW ASSY,PWA,MN,32 GB,BOUNCE,CHINA,ROW PAD,CONNECTOR,REAR IMGR Display Flex ZIF Connector Pad Place the Display Flex ZIF Connector Pad on the PCB, using the etched markings on the PCB to align it. - Page 84 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Place the Rear-Facing Imager ZIF Connector Pad on the PCB, using the etched markings on the PCB to align it. Motorola Mobility Confidential Restricted: PAGE 84 Do not share without consent from Motorola...
-
Page 85: Proximity Grommet Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Proximity Grommet Assembly Description Reference # ASSY,PWA,MN,BOUNCE VZW ASSY,PWA,MN,BOUNCE,ROW ASSY,PWA,MN,64 GB,BOUNCE,VZW ASSY,PWA,MN,64 GB,BOUNCE,ROW ASSY,PWA,MN,32 GB,BOUNCE,CHINA,ROW GROM,SENSOR,KINZIE Use the Plastic Tweezers to place the Proximity Grommet in position on the Proximity Sensor. Verify the Proximity Grommet is flush with the Proximity Sensor. -
Page 86: Ir Led Grommet Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual IR LED Grommet Assembly Description Reference # ASSY,PWA,MN,BOUNCE VZW ASSY,PWA,MN,BOUNCE,ROW ASSY,PWA,MN,64 GB,BOUNCE,VZW ASSY,PWA,MN,64 GB,BOUNCE,ROW ASSY,PWA,MN,32 GB,BOUNCE,CHINA,ROW SEAL,IR LED Use the Plastic Tweezers to place the IR LED Grommet in position on the IR LED. -
Page 87: Main-Microphone Grommet Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Main-Microphone Grommet Assembly Description Reference # ASSY,PWA,MN,BOUNCE VZW ASSY,PWA,MN,BOUNCE,ROW ASSY,PWA,MN,64 GB,BOUNCE,VZW ASSY,PWA,MN,64 GB,BOUNCE,ROW ASSY,PWA,MN,32 GB,BOUNCE,CHINA,ROW GROM,MIC PURPLE 2 (qty 4) GROM,MIC ORANGE Motorola Mobility Confidential Restricted: PAGE 87 Do not share without consent from Motorola... - Page 88 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Use the Plastic Tweezers to place the 4 Main- Microphone Grommets in position on the Microphones. Verify all 4 Microphone Grommets are flush with the PCB. NOTE Only 2 of the 4 Microphone Grommets are shown.
-
Page 89: Ir Led Flex Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual IR LED Flex Assembly Description Reference # ASSY,PWA,MN,BOUNCE VZW ASSY,PWA,MN,BOUNCE,ROW ASSY,PWA,MN,64 GB,BOUNCE,VZW ASSY,PWA,MN,64 GB,BOUNCE,ROW ASSY,PWA,MN,32 GB,BOUNCE,CHINA,ROW ASSY,FLXCKT,IR LED,KINZIE Insert the IR LED Flex into the IR LED Flex ZIF Connector, using the white line as a guide for insertion depth. -
Page 90: Rear-Facing Imager Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Rear-Facing Imager Assembly Description Reference # ASSY,PWA,MN,BOUNCE VZW ASSY,PWA,MN,BOUNCE,ROW ASSY,PWA,MN,64 GB,BOUNCE,VZW ASSY,PWA,MN,64 GB,BOUNCE,ROW ASSY,PWA,MN,32 GB,BOUNCE,CHINA,ROW ASSY,FLXCKT,CAMERA,REAR FACING 21MP IMAGER,KINZIE Insert the Rear-Facing Imager Flex into the Rear-Facing Imager ZIF Connector. -
Page 91: Trim Ring Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Trim Ring Assembly Description Reference # ASSY,HSG,LENS W/ FRNT HOUSING,PSA,BLACK,ROW,KINZIE ASSY,HSG,LENS W/ FRNT HOUSING,PSA,WHITE,ROW,KINZIE HSG,FRNT RIM,DECORATED,BLACK HSG,FRNT RIM,DECORATED,WHITE Place the top side of the Trim Ring onto the Display. - Page 92 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Push the left side of the Trim Ring into the recess of the Display and engage the snap. Motorola Mobility Confidential Restricted: PAGE 92 Do not share without consent from Motorola...
- Page 93 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Push the right side of the Trim Ring into the recess of the Display and engage the 2 snaps. Push the USB Connector side of the Trim Ring into the recess of the Display.
- Page 94 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Verify the Trim Ring is seated in the recess of the Display, and no light is visible between the Trim Ring and Display. Motorola Mobility Confidential Restricted: PAGE 94 Do not share without consent from Motorola...
-
Page 95: Coax Cable Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Coax Cable Assembly Description Reference # ASSY,PWA,MN,BOUNCE VZW ASSY,PWA,MN,BOUNCE,ROW ASSY,PWA,MN,64 GB,BOUNCE,VZW ASSY,PWA,MN,64 GB,BOUNCE,ROW ASSY,PWA,MN,32 GB,BOUNCE,CHINA,ROW CABLE,COAX // CAUTION // The Coax Cable must be assembled to the PCB with the small cable shield towards the PCB. - Page 96 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Place one end of the Coax Cable over the connector on the PCB. Press down on the Coax Cable until it snaps in place. Push the Coax Cable and small cable shield into the guide on the PCB.
-
Page 97: Pcb Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual PCB Assembly Description Reference # ASSY,HSG,LENS W/ FRNT HOUSING,PSA,BLACK,ROW,KINZIE ASSY,HSG,LENS W/ FRNT HOUSING,PSA,WHITE,ROW,KINZIE ASSY,PWA,MN,BOUNCE VZW ASSY,PWA,MN,BOUNCE,ROW ASSY,PWA,MN,64 GB,BOUNCE,VZW ASSY,PWA,MN,64 GB,BOUNCE,ROW ASSY,PWA,MN,32 GB,BOUNCE,CHINA,ROW Insert the Display Flex into the Display Flex ZIF Connector. - Page 98 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Lower the PCB into the Display, keeping the Side-Key Flex and Touch Flex from tucking underneath the PCB. Motorola Mobility Confidential Restricted: PAGE 98 Do not share without consent from Motorola...
- Page 99 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Remove the adhesive liner from the Touch Flex if present. Fold the Touch Flex down onto the PCB, aligning it to the etched markings on the PCB. Insert the Touch Flex into the Touch Flex ZIF Connector.
- Page 100 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Verify the Display Flex is inserted in the Display Flex ZIF Connector. Use the white line as a guide for insertion depth. 10. Slide a fingertip across the ZIF Connector Door to close it.
- Page 101 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual 15. Place the end of the Coax Cable over the connector on the PCB. 16. Press down on the Coax Cable until it snaps in place. 17.
-
Page 102: Earpiece Speaker Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Earpiece Speaker Assembly Description Reference # ASSY,HSG,LENS W/ FRNT HOUSING,PSA,BLACK,ROW,KINZIE ASSY,HSG,LENS W/ FRNT HOUSING,PSA,WHITE,ROW,KINZIE TRANSDUCER,OTHR,6X12X3,6X12X3MM RCVR F0=200HZ, AAC Remove the Earpiece Speaker adhesive liner. Place the Earpiece Speaker in the pocket of the Display, with the raised speaker contacts facing away from the top edge of the phone as shown. -
Page 103: Front-Facing Imager Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Front-Facing Imager Assembly Description Reference # ASSY,HSG,LENS W/ FRNT HOUSING,PSA,BLACK,ROW,KINZIE ASSY,HSG,LENS W/ FRNT HOUSING,PSA,WHITE,ROW,KINZIE SEAL,O-RING,FRONT IMGR ASSY,FLXCKT,5MP IMAGER,KINZIE Place the Front-Facing Imager Gasket over the Front Facing Imager as shown. Motorola Mobility Confidential Restricted: PAGE 103 Do not share without consent from Motorola... - Page 104 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Spray the Front-Facing Imager pocket in the Display with compressed air to remove any dust or foreign material. Remove the protective liner from the Front- Facing Imager if present. Place the Front-Facing Imager into the pocket of the Display.
-
Page 105: Secondary-Microphone Grommet Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Secondary-Microphone Grommet Assembly Description Reference # ASSY,HSG,LENS W/ FRNT HOUSING,PSA,BLACK,ROW,KINZIE ASSY,HSG,LENS W/ FRNT HOUSING,PSA,WHITE,ROW,KINZIE GROM,SEAL,MIC 5 Use the Tweezers to place the Secondary- Microphone Grommet into position on the Display. -
Page 106: Battery Adhesive Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Battery Adhesive Assembly Description Reference # ASSY,BAT,LI POLY,FB55,3760MAH,LG CHEM DIE CUT,ADHES,BAT Remove the Battery Adhesive from the carrier. Place the Battery Adhesive onto the Battery. Align the flat edge of the Battery Adhesive liner with the black Battery liner tape, and the curved edge of the adhesive with the text on the Battery foil pack. -
Page 107: Battery Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Battery Assembly Description Reference # ASSY,HSG,LENS W/ FRNT HOUSING,PSA,BLACK,ROW,KINZIE ASSY,HSG,LENS W/ FRNT HOUSING,PSA,WHITE,ROW,KINZIE ASSY,BAT,LI POLY,FB55,3760MAH,LG CHEM ASSY,CHAS,REAR,KINZIE SCR,MACH,M1.4 4 (qty 2) /// WARNING /// // CAUTION // Failure to adhere to Safety Critical Note(s) may increase Handle the Battery Pack with care. - Page 108 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Remove the adhesive liner from the Battery Adhesive. Place the Battery into the pocket of the Display, sliding the top-right corner of the Battery under the SIM/SD Tray slot. Press down on the Battery for 5 seconds to secure it to the Display.
- Page 109 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Press down on the Battery Flex BtB Connector to connect it to the PCB. Place the Chassis over the PCB, using the screw holes in the Chassis to align it. Place the Bounce Chassis Screw Guide (3-00-F6-10000) over the Chassis.
-
Page 110: Heatspreader Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Heatspreader Assembly Description Reference # ASSY,HSG,LENS W/ FRNT HOUSING,PSA,BLACK,ROW,KINZIE ASSY,HSG,LENS W/ FRNT HOUSING,PSA,WHITE,ROW,KINZIE DIE CUT,THRM SPREAD,MSM,KINZIE /// WARNING /// // CAUTION // Failure to adhere to Safety Critical Note(s) may increase Handle the Battery Pack with care. - Page 111 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Remove the Heatspreader adhesive liner. Place the Heatspreader over the Battery and Chassis. Align the top and left sides to the raised features of the Battery. Press down on the Heatspreader for 5 seconds to secure it to the Battery and Chassis.
-
Page 112: Nfc Antenna Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual NFC Antenna Assembly Description Reference # ASSY,HSG,REAR,METALLIC DK GRY ASSY,HSG,REAR,TIN SILVER,KINZIE ASSY,HSG,REAR,CHAMPAGNE,KINZIE ASSY,HSG,REAR,RED,KINZIE FLX,NFC,WLC Remove the NFC Antenna adhesive liner. Place the NFC Antenna into the cutout area of the Rear Housing. - Page 113 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Apply manual pressure to the NFC Antenna as follows: Place both thumbs on point 1 and slide them • out to point 2. // CAUTION // Do not apply pressure to the LED Flash Flex.
-
Page 114: Vibrator Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Vibrator Assembly Description Reference # ASSY,HSG,REAR,METALLIC DK GRY ASSY,HSG,REAR,TIN SILVER,KINZIE ASSY,HSG,REAR,CHAMPAGNE,KINZIE ASSY,HSG,REAR,RED,KINZIE ALERT DEVICE,VIBR,MOTOR, ROTARY, 11.75 MM X X 4.55 MM MOTOR BODY Place the Vibrator into the pocket of the Rear Housing. - Page 115 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Verify the Vibrator is fully seated in the pocket of the Rear Housing. Motorola Mobility Confidential Restricted: PAGE 115 Do not share without consent from Motorola...
-
Page 116: Headset Jack Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Headset Jack Assembly Description Reference # ASSY,HSG,REAR,METALLIC DK GRY ASSY,HSG,REAR,TIN SILVER,KINZIE ASSY,HSG,REAR,CHAMPAGNE,KINZIE ASSY,HSG,REAR,RED,KINZIE CONN,JACK,HEADSET,3.5 MM DIA Remove the Headset Jack adhesive liner. Place the Headset Jack into the pocket of the Rear Housing. - Page 117 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Verify the Headset Jack is flush to the edges of the pocket of the Rear Housing. Motorola Mobility Confidential Restricted: PAGE 117 Do not share without consent from Motorola...
-
Page 118: Loudspeaker Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Loudspeaker Assembly Description Reference # ASSY,HSG,REAR,METALLIC DK GRY ASSY,HSG,REAR,TIN SILVER,KINZIE ASSY,HSG,REAR,CHAMPAGNE,KINZIE ASSY,HSG,REAR,RED,KINZIE TRANSDUCER,POLYPHONIC,13X18X2P5 Remove the Loudspeaker Adhesive from the carrier. Place the Loudspeaker Adhesive into the Bounce Audio Gasket Alignment Fixture (3-00- D9-10000), using the pins in the fixture to align it. - Page 119 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Place the Rear Housing into the fixture over the Loudspeaker Adhesive, using the pins in the fixture to align it. Press down on the entire Rear Housing for 5 seconds to secure the adhesive.
-
Page 120: Rear Housing Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Rear Housing Assembly Description Reference # ASSY,HSG,LENS W/ FRNT HOUSING,PSA,BLACK,ROW,KINZIE ASSY,HSG,LENS W/ FRNT HOUSING,PSA,WHITE,ROW,KINZIE ASSY,HSG,REAR,METALLIC DK GRY ASSY,HSG,REAR,TIN SILVER,KINZIE ASSY,HSG,REAR,CHAMPAGNE,KINZIE ASSY,HSG,REAR,RED,KINZIE BTN,POWER,GRAPHITE GRAY,KINZIE BTN,VOLUME,GRAPHITE GRAY,KINZIE SCR,MACH,M1.4 5 (qty 19) ASSY,HSG,STOPPER,EARPIECE/FLASH,KINZIE ASSY,HSG,STOPPER,NFC CONN... - Page 121 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Insert the Side Keys into the slots of the Rear Housing. Orient the Side Keys as shown. Push the Side Keys into the slots until they are flush with the edge of the Rear Housing.
- Page 122 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Press down on the USB Connector side of the Rear Housing to engage the snaps. 10. Tighten the 17 3IP screws to 1.0 in-lbs (0.11N m) in the order shown. Motorola Mobility Confidential Restricted: PAGE 122 Do not share without consent from Motorola...
- Page 123 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual 11. Press down on the Flash Flex BtB Connector to connect it to the PCB. 12. Press down on the NFC Antenna BtB Connector to connect it to the PCB. 13.
-
Page 124: Rear-Facing Imager Lens Assembly
DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Rear-Facing Imager Lens Assembly Description Reference # ASSY,HSG,REAR,METALLIC DK GRY ASSY,HSG,REAR,TIN SILVER,KINZIE ASSY,HSG,REAR,CHAMPAGNE,KINZIE ASSY,HSG,REAR,RED,KINZIE LENS,IMAGER,REAR Remove the adhesive liner from the Rear-Facing Imager Lens. Place the Rear-Facing Imager Lens on the Rear Housing, using the raised features to align the lens. - Page 125 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Rear Inlay Assembly Description Reference # ASSY,HSG,REAR,METALLIC DK GRY ASSY,HSG,REAR,TIN SILVER,KINZIE ASSY,HSG,REAR,CHAMPAGNE,KINZIE ASSY,HSG,REAR,RED,KINZIE DIE CUT,ADHESIVE,INLAY,REAR COVER ASSY,HSG,INLAY,CSR,BLACK,REAR COVER,ROW ASSY,HSG,INLAY,CSR,WINTER WHITE,REAR COV ASSY,HSG,INLAY,NYLON,BLACK,REAR CVR ASSY,HSG,INLAY,NYLON,BLACK,ROW,REAR CVR ASSY,HSG,INLAY,NYLON,GRAY,ROW,REAR CVR BZL,DECO,REAR,METALLIC DK GRY BZL,DECO,REAR,METALLIC SLVR BZL,DECO,REAR,METALLIC RED...
- Page 126 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Place the Inlay Adhesive into the Bounce Inlay Adhesive Fixture (3-00-E8-10000), using the pin in the fixture and the deco hole in the adhesive to align it. Remove the adhesive liner from the Inlay Adhesive.
- Page 127 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Remove the adhesive liner from the Camera Deco. Place the Camera Deco on the Rear-Facing Imager Bezel, aligning the Bezel Lens. Press down on the Camera Deco for 5 seconds to secure it to the Rear-Facing Imager Bezel.
- Page 128 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual 14. Verify the liners on the Rear Housing and Flash Lens have been removed, if present. 15. Remove the remaining adhesive liner from the Rear Inlay. 16.
- Page 129 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual 19. Place both thumbs on point 1 and slide them around the perimeter of the Rear Inlay to point 2. 20. Place the phone onto the Universal Nest (3-00- A7-10000), with the Display side face up.
- Page 130 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual 21. Place the Universal Press Fixture (3-00-A3- 10000) onto the Universal Nest over the phone. 22. Place the brackets for the Universal Press Weights onto the Universal Press Fixture. 23.
- Page 131 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual 24. Using both hands, press down on the phone with the Universal Press Fixture at 500 N m for 5 seconds. 25. Repeat two more times. 26.
- Page 132 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Audio Deco Assembly Description Reference # ASSY,HSG,LENS W/ FRNT HOUSING,PSA,BLACK,ROW,KINZIE ASSY,HSG,LENS W/ FRNT HOUSING,PSA,WHITE,ROW,KINZIE ASSY,HSG,AU DECO,T&R,METALLIC RED,KINZIE (REWORK) BZL,AU DECO,METALLIC BLK (REWORK) BZL,AU DECO,METALLIC SLVR (REWORK) BZL,AU DECO,METALLIC DK GRY (REWORK) ASSY,HSG,AU DECO,T&R,METALLIC RED,KINZIE (ORIGINAL) BZL,AU DECO,METALLIC BLK (ORIGINAL)
- Page 133 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual NOTE When the Display is new, assemble using an original Audio Bezel. When the Display is reused, assemble using a rework Audio Bezel, which has added features on the tab.
- Page 134 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual Insert the Audio Bezel into the slot in the alignment lid. Use the Bounce Audio Bezel Press Tool (3-00-F7-10000) to press the Audio Bezel into the Display. Motorola Mobility Confidential Restricted: PAGE 134 Do not share without consent from Motorola...
- Page 135 DROID TURBO 2 / Moto X Force Level 2 – Service and Repair Manual SIM/SD Tray Assembly Description Reference # ASSY,HSG,REAR,METALLIC DK GRY ASSY,HSG,REAR,TIN SILVER,KINZIE ASSY,HSG,REAR,CHAMPAGNE,KINZIE ASSY,HSG,REAR,RED,KINZIE ASSY,HSG,SIM DOOR, FULL FLOOR TRAY,DARK MTLC GRAY, KINZIE ASSY,HSG,SIM DOOR,FULL FLOOR TRAY,LIGHT ASSY,HSG,SIM DOOR, FULL FLOOR TRAY,SINGLE SIM,METALLIC DK GRAY ASSY,HSG,SIM DOOR, FULL FLOOR TRAY,SINGLE SIM,METALLIC SILVER,KI ASSY,HSG,SIM DOOR, FULL FLOOR TRAY,SINGLE SIM,METALLIC CHAMPAGNE ASSY,HSG,SIM DOOR, FULL FLOOR TRAY,SINGLE SIM,RED,KINZIE...