Moto Z (Droid) / Moto Z
Level 2 – Service and Repair Manual
Display Removal
NOTE
The Display can be recovered and
reused after removal if the Lens is not
damaged.
1.
Remove the Display Liner, if present.
2.
Place the Sheridan Lens Adhesive Heating Plate
(3-00-J7-10000) on the Hot Plate.
3.
Set the Hot Plate to 100 °C (212 °F).
// CAUTION //
Do not set the Hot Plate temperature higher than
100 °C (212 °F). Damage to the phone may
occur.
4.
Wait 10-15 minutes for the Hot Plate to warm up.
5.
Place the phone in the plate, with the Display
side down.
6.
Wait 10 minutes for the Display to warm up.
7.
Remove the phone from the plate.
// CAUTION //
Wear protective gloves when handling heated
phones.
PAGE 19
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola