Moto Z (Droid) / Moto Z
Level 2 – Service and Repair Manual
Vibrator Removal
NOTE
The Vibrator can be recovered and
reused after removal.
1.
Remove the Kapton Tape from the Vibrator Flex
ZIF Connector.
NOTE
After you remove the Kapton Tape, you
cannot reuse it.
2.
Use the flat end of the Blackstick to open the
Vibrator Flex ZIF Connector Door.
3.
Use the Plastic Tweezers to remove the Vibrator
Flex from the ZIF Connector.
4.
Use the Plastic Tweezers to hold the metal tab
on the Vibrator.
5.
Pull up to remove the Vibrator from the Housing.
PAGE 40
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola