Moto Z (Droid) / Moto Z
Level 2 – Service and Repair Manual
Main-Microphone Grommet Assembly
Description
ASSY,PWA,MN,BD KIT, SHERIDAN,ROW
ASSY,PWA,MN,BD KIT, SHERIDAN, VZW,64GB
ASSY,PWA,MN,BD KIT, SHERIDAN,ROW, 64GB
ASSY,PWA,MN,BD KIT,SHERIDAN,CHINA
ASSY,PWA,MN,BD KIT, SHERIDAN-64GB,ROW (JAG)
ASSY,PWA,MN,BD KIT, SHERIDAN, 32GB-NA
GROM,MIC,PRIMARY, SHERIDAN
1.
Remove 2 Main-Microphone Grommets from the
carrier.
2.
Place the 2 Main-Microphone Grommets in
position over the Microphones located at the
bottom of the PCB.
3.
Press down on the 2 Main-Microphone
Grommets for 5 seconds each to secure them to
the PCB.
4.
Verify the 2 Microphone Grommets are flush with
the PCB, and oriented as shown.
PAGE 101
Reference #
2
22 (qty 2)
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola