Moto Z (Droid) / Moto Z
Level 2 – Service and Repair Manual
Fingerprint Sensor Removal
NOTE
The Fingerprint Sensor (FPS) can be
recovered and reused after removal.
1.
Remove the Kapton
ZIF Connector.
NOTE
After you remove the Kapton Tape, you
cannot reuse it.
2.
Remove the Kapton Tape from the FPS Flex
Components.
3.
Remove the Anti Rotation Kapton Tape from the
FPS, FPS Flex, and Display Flex as shown.
4.
Use the Thin Plastic Spudger to open the FPS
Flex ZIF Connector Door.
PAGE 26
Tape from the FPS Flex
®
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola