Fps Flex Removal - Lenovo Moto E5 Service And Repair Manual

Lenovo Moto E5
Level 2 – Service and Repair Manual

FPS Flex Removal

NOTE
The FPS can be recovered and
reused after removal.
1. Use the Torque Driver and the JCS #0 bit to
remove the 2 Machine Screws holding the
FPS Flex Cover to the Rear Housing.
NOTE
The 2 machine screws holding the FPS Flex
Cover are different sizes. Do not mix them up
when reattaching the Flex.
NOTE
After you remove the Machine Screws,
you cannot reuse them.
2. Use the Tweezers to remove the FPS Flex
Cover from the Rear Housing.
3. Use the Thin Plastic Spudger to disengage
the FPS Flex BtB Connector from the Main
PCB.
PAGE 26
04/20/2018
Lenovo Confidential Restricted:
Do not share without consent from Lenovo