Moto Z (Droid) / Moto Z
Level 2 – Service and Repair Manual
7.
Insert the Metal Shim Tool (3-00-K3-10000)
under the bottom edge of the Rear Top Lens.
8.
Insert the Thin Plastic Spudger under the Metal
Shim Tool.
9.
Remove the Metal Shim.
10. Slide the Thin Plastic Spudger to the right to
separate the adhesive from the Housing.
11. Lift the Rear Top Lens away from the Housing.
12. Insert the Metal Shim Tool under the top edge of
the Rear Bottom Lens.
PAGE 30
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola