Ir Led Grommet Assembly - Lenovo motorola Moto Z Droid Service And Repair Manual

Moto Z (Droid) / Moto Z
Level 2 – Service and Repair Manual

IR LED Grommet Assembly

Description
ASSY,PWA,MN,BD KIT, SHERIDAN,ROW
ASSY,PWA,MN,BD KIT, SHERIDAN, VZW,64GB
ASSY,PWA,MN,BD KIT, SHERIDAN,ROW, 64GB
ASSY,PWA,MN,BD KIT,SHERIDAN,CHINA
ASSY,PWA,MN,BD KIT, SHERIDAN-64GB,ROW (JAG)
ASSY,PWA,MN,BD KIT, SHERIDAN, 32GB-NA
GROM,GESTURE,TX
1. Remove the IR LED Grommet from the carrier.
2. Place the IR LED Grommet over the LED Sensor
on the PCB.
3. Press down on the IR LED Grommet for 5
seconds to secure it to the IR LED.
4. Verify the IR LED Grommet is flush with the IR
LED.
PAGE 100
Reference #
2
23
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola