Rear-Facing Imager Assembly - Lenovo motorola Moto Z Droid Service And Repair Manual

Moto Z (Droid) / Moto Z
Level 2 – Service and Repair Manual

Rear-Facing Imager Assembly

Description
ASSY,PWA,MN,BD KIT, SHERIDAN,ROW
ASSY,PWA,MN,BD KIT, SHERIDAN, VZW,64GB
ASSY,PWA,MN,BD KIT, SHERIDAN,ROW, 64GB
ASSY,PWA,MN,BD KIT,SHERIDAN,CHINA
ASSY,PWA,MN,BD KIT, SHERIDAN-64GB,ROW (JAG)
ASSY,PWA,MN,BD KIT, SHERIDAN, 32GB-NA
IMGR MDL,CMOS,13.2MP,10.5X10.5X4.75MM,MIPI,5P,1/3.2,LAND,2.8V
DIE CUT,ADHES,LINER, RF, IMAGER, LENS, INSIDE, SHERIDAN
DIE CUT,ADHES,CAMR LENS, REAR, SHERIDAN
PAD,RF 13MP IMAGER, SHERIDAN
DIE CUT,KAPTON, UNIVERSAL, 13 X 4
1. Remove the adhesive liner from the Rear-Facing
Imager Pads.
2. Manually place the Rear-Facing Imager Pads on
the Rear-Facing Imager as shown.
3. Press down on the Rear-Facing Imager Pads for
5 seconds to secure them to the Rear-Facing
Imager.
4. Remove the remaining liner from the Pads.
5. Remove the Rear-Facing Imager Adhesive from
the carrier.
6. Manually place the Rear-Facing Imager
Adhesive on the Rear-Facing Imager as shown.
7. Press down on the Rear-Facing Imager
Adhesive for 5 seconds to secure it to the Rear-
Facing Imager.
PAGE 103
Reference #
2
32
33
--
--
--
.7
.7
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola