DROID TURBO 2 / Moto X Force
Level 2 – Service and Repair Manual
IR LED Flex Removal
NOTE
The IR LED Flex can be recovered
and reused after removal.
1.
Use the Tweezers to remove the Kapton Tape
from the IR LED Flex ZIF Connector.
NOTE
After you remove the Kapton Tape, you
cannot reuse it.
2.
Use the flat end of the Blackstick to open the IR
LED Flex ZIF Connector door.
3.
Remove the IR LED Flex from the connector.
PAGE 55
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola