(6) Insert the ribbon into the film cartridge as figure 13.
After inserting, tighten the ribbon.
(Caution! If the ribbon is not tightened, a rolling up error might be happened)
(7) Insert the disposable cleaning roller
into the cartridge as figure 14.
Peel the protective wrapper from the
cleaning roller. After removing the
protective wrapper, the cleaning
roller should be kept clean from
fingerprints, dust and foreign
substances to avoid contamination
because it is adhesive.
(Caution! Do not use without peeling off
the protective wrapper because the
cleaning roller cannot perform its
function)
Figure 13 Loading the ribbon
Figure 14 Installing the cleaning roller
33