Table of Contents
Advertisement
(3)
Card Printer Advanced Setup
Advanced settings allow you to set advanced features for the SMART-81 printer. If
you are not sure about the function, Please contact the local supplier
①
To set the printer's information
Change Printer ID: When using SDK, you can set a unique ID for SMART-81
printer regardless of whether it is connected by USB or what IP address is. It is
useful to connect and use several printers. Default ID is "SMART
Set PC Serial: One of security function. You can use a printer only with USB
connected specific PC. Enabling "Security"-"PC Authentication" will only make the
printer available when connected specific PC. "Set PC Serial" records the unique
information of the PC to be used on the printer and is used as the PC credential the
next time the printer is turned on.
Change Head: When you replace thermal print head, you must change head
information for optimal quality. Please change head serial number, resistor and type
of head in the Change Head Dialog window after click "Change Head
Figure 62 Cardprinterconfig – Advanced setup
61
②
①
③
Advertisement
Table of Contents
