Figure 11 Loading The Ribbon 1; Figure 12 Loading The Ribbon 2; Figure 13 Installing The Cleaning Roller; Figure 14 Peeling The Protective Wrapper - idp SMART-21S User Manual

Hide thumbs

Table Of Contents

Table of Contents

(4) Install a ribbon into the ribbon

cartridge as the right picture.

(5) Insert the supply side of the

ribbon to no.1 hole and press the

opposite (no.2). Insert the take-up

side of the ribbon same method to

no.3 and no.4. After inserting,

tighten the ribbon.

(Caution! If the ribbon is not tightened, a

rolling up error might be happened.)

(6) Install the disposable cleaning roller

to the ribbon cartridge.

(The ribbon tag side of the supply core should

be mounted in the direction of the ribbon tag

marking on the cartridge.)

(7) Peel the protective wrapper from the

cleaning roller.

After removing the protective wrapper, the

cleaning roller should be kept clean from

fingerprints, dust and foreign substances to

avoid contamination because it is adhesive.

(Caution! Do not use without peeling off the

protective wrapper because the cleaning

roller cannot perform its function.)