TPH None
Heater None
Bheater None
Heater Broken
Bheater Broken
PrintData Fail
Spool Full
Invalid Password
Set Fail
Lcd Con Error
Thermal Print Head is not installed or not recognized
-. Check the print head installation
-. Contact the place of purchase
Retransfer heater is not installed or not recognized
-. Check the Retransfer installation
-. Contact the place of purchase
Band heater is not installed or not recognized
-. Check the Band Heater installation
-. Contact the place of purchase
Retransfer's control circuit or heater not operate
-. Check the Retransfer installation
-. Contact the place of purchase
Bheater's control circuit or heater not operate
-. Check the Bheater installation
-. Contact the place of purchase
Error in print data
-. Replace the USB cable USB
-. Change the USB port in the PC
-. Reinstall the printer driver
-. Check the options for the print data are correct
The printing data is full in the spooler
-. This message disappear after printing all data to send
-. Turn off/on the printer if the spool data is full without printing
The password is not correct.
-. Input the correct password.
-.
Contact the place of purchase if you forget the password
Failed to execute a command of the printer
-. Replace the USB cable USB
-. Change the USB port in the PC
-. Turn off/on the printer
Error occurs while control Lcd
-. Please reboot computer.
.
.
.
.
.
.
87
.
.