Figure 65 Network Printer Is No Found; Figure 66 Connecting To Usb Port - idp SMART-81 User Manual

(3) Select network printer
When no printer is connected to network,
there is no printer shown on the box.
Please click "Refresh".
If no printer shown, please check as below.
Please check the printer is turned on.

Please check network cable is

connected to network hub and works
properly. (LED lamp blinking)
Please check if there is DHCP server in

the local network. When DHCP server
is not in your local network, you need to
set static IP.
If static IP is used, Please check the IP

configuration. If another device uses
same IP address, it doesn't work.
Select USB printer
(4)
If you are unable to find printer in local
network, please connect printer by USB.
You can setup network by USB.
When you click Refresh, you can find a
printer connected by USB as shown in the
left picture.
You don't need to install device driver

for network configuration by USB.
Please ignore messages related to
device installation.
You can change values of "System

Management" only when you connect a
printer by USB. Please connect a
printer by network to use all of the
functions of Netadmin.exe.

Figure 65 Network printer is no found

Figure 66 Connecting to USB Port

67