Ribbon Save: Select split function or not
when use Mono ribbon.
Anti-Aliasing: Set Anti-Aliasing level of
printer image.
Color Sense: Set print image's color sense.
Laminating Setting
(5)
This tap will be shown only when SMART-
81 printer is connected to Laminator.
Do Laminating: You can select laminating
or not.
Laminator Side: you can select not use, top
side, bottom side and both sides
printing.
Encoding Setting
(6)
This tap will be shown only when Magnetic
encoder is installed.
Do Encoding: you can select encoding or
not.
[ MS Encoding ]
Coercivity: you can select the encoding
types.
LoCo: 300, 600 Oe.
HiCo: 2760 Oe.
SpCo: 4000 Oe.
Auto: Defined automatically.
Repeat Count: you can select the retry
count to encoding when encoding is
failed.
Figure 49 Laminating Setting
Figure 50 Encoding Setting
50