Cleaning And Replacement Printer Air Filter - idp SMART-81 User Manual

The following shows the error message on your Laminator. For checking a status of Laminator,
please use a CardPrinterTest or CardPrinterDiagnostics in the Utilities folder.
Message
L CardIn Err
L CardFeed Err
L CardOut Err
L HT UpDown Err
L LaminatingErr
L Command Err
L Init Err
L Film Seek Err
L Film Zero
L Film Empty
L HT Over/Cnt
L HT Fet Err
L HT Temp Err
L BootDown Err

5.2. Cleaning and Replacement Printer air filter

If printer air filter is much dust, need to cleaning and replacement it for prevent dust.
1. As shown in the below picture, you can remove the protect cover by pressing the locking
part in the direction of the arrow and pulling it up.
2. Remove the filter, wash it in running water, and completely dry it.
Card in error
Card feeding error
Card out error
Head up/down error
Error occur while Laminating
Error occur while execute command
Initial error
Film seek error
All firms are used
Film is not installed
Thermal Head is overheated or fail control temp.
Head FET error
Fail setting head temp
Error while bootloader F/W download
Discription
88