4.4. Firmware update
When you run the CardPrinterFirmware, you can see the pop-up window.
(1)
CardPrinterFirmware Menu
Device: Select the local printer that you
want to upgrade.
Card Printer / Laminator: Select the
device you want upgrade.
Device Version: Displays the current
firmware version of selected printer.
Binary File: Click "Browse" button and
select new firmware fir to update.
Manual Update: it is used when you
want to update manually.
Update: Updates automatically. In
generally, we recommend updating
automatically.
Close: exit.
Color Sensor Calibration: To re-
adjust the measured value of the
color sensor.
Message: It is displays information of
updating.
(2)
Ready for firmware update
Select the printer to update the
firmware on the 'Device' list.
Select the device to update the
firmware among Printer/ Laminator tab.
The Laminator tab is shown if that
option is installed only.
Click "Browse" and select the new
firmware.
Clock "open".
Figure 83 CardPrinterFirmware
Figure 84 Select Firmware
82