Table of Contents
Advertisement
Owner´s Manual Permolock C
Installation of locking plate in the vehicle
Read through the instructions before starting installation.
m
CAUTION
To ensure that the wheelchair locking device ends in the correct position for locking, it is important
that the locking plate is mounted correctly in relation to the wheelchair wheels. When mounting on a
sloping surface, the locking plate may be raised using spacers to ensure satisfactory engagement
and locking. See the examples below. Spacers for use when installing on a sloping surface are
available as accessories, see page 17.
When installing the locking plate on a sloping surface, alternative mounting of the rubber rollers on
the plate may be necessary, see page 25.
The chair lock must be anchored in a manner that is safe for the type of vehicle involved and which
conforms to the relevant countryís regulations.
The chair lock must be anchored in such a way that no other components are damaged and the
strength of the vehicle floor is not impaired.
Vehicle floor
Locking plate
Spacer
m
CAUTION
In order to ensure proper installation:
1. Check after installation that the chair lock is not warped and that the lock functions correctly.
2. The lock must be tested with the user sitting in the wheelchair.
3. Check that the wheelchair shock absorbers are set for the right user weight, see the relevant
chassis service manual.
4. Also check that the air pressure in the wheelchair tires is correct, see the relevant chassis
user
manual.
Installation with sloping surface
24
General
-
Installation
Advertisement
Table of Contents
