Maintenance - Permobil Permolock C Owner's Manual

Owner´s Manual Permolock C

Maintenance

Cleaning
The following is general advice recommended by Permobil. For severe soiling or
damage to surface finish, contact Permobil for information.
For normal cleaning proceed carefully with a soft cloth/sponge, hot water and a
mild detergent. Wipe down carefully with a cloth and water, and dry off.
m
VARNING
Never hose the lock down as the electronics may be damaged.
Check the diameter of the locking device regularly using the accompanying inspection wrench.
If the locking device fits within the wrench opening, then the locking device is worn and therefore
must be replaced.
Regular maintenance
-
Sparingly grease the contact surfaces of
the locking device and the locking plate
mechanism on a regular basis (Lubetec
Redguard, Art.no.1190). Use a file to
remove any sharp edges.
- Check the diameter of the locking device
regularly using the accompanying inspec-
tion wrench. If the locking device fits within
the wrench opening, then the locking device
is worn and therefore must be replaced.
Maintenance & Technical specifications
Check the diameter of the
locking device regularly.
17
Important!